PDA

View Full Version : System = 100% CPU




musicpyrite
Aug 19, 2004, 03:08 PM
The tittle pretty much says it all.

Well, I don't know what to do.
I've repaid permissions twice.
Logged out.
Restarted twice.

When I go into the Activity Monitor, my CPU is running 100%, and 80%+ is coming from the System. I've tried to sort the processes by how much they use, but no single process is taking up more than 5%, and most of them read 0%.

It's not the Finder, as some other people have reported.

Any ideas?

btw, I've mad sure to quit F@H. ;)



stoid
Aug 19, 2004, 03:10 PM
sort by CPU, or whatever you have to do to find which processes are going full blast. Sometimes, I get a WindowServer process that acts up, and I log out and back in, and that fixes the problem.

vraxtus
Aug 19, 2004, 03:10 PM
The tittle pretty much says it all.

Well, I don't know what to do.
I've repaid permissions twice.
Logged out.
Restarted twice.

When I go into the Activity Monitor, my CPU is running 100%, and 80%+ is coming from the System. I've tried to sort the processes by how much they use, but no single process is taking up more than 5%, and most of them read 0%.

It's not the Finder, as some other people have reported.

Any ideas?

btw, I've mad sure to quit F@H. ;)

Clean install your OS?

If that doesn't work it's prolly the logic board.

musicpyrite
Aug 19, 2004, 03:23 PM
sort by CPU, or whatever you have to do to find which processes are going full blast. Sometimes, I get a WindowServer process that acts up, and I log out and back in, and that fixes the problem.
Check out the pic below, from the number below, I should only be using 27.6% of my CPU, but the monitor sill says 100%.

Clean install your OS?

If that doesn't work it's prolly the logic board.

I was thinking about re installing the OS, but I want to leave that as a last resort.

And why would the logic board cause this kind of problem? (if it in fact is the logic board)

Sun Baked
Aug 19, 2004, 03:25 PM
Are you sure it isn't something silly you added to destroy your computer like Konfabulator or Norton?

musicpyrite
Aug 19, 2004, 03:29 PM
I don't use norton, because of the horror stories I've heard from here, and I'm too cheap to buy it.

And I haven't installed any kind of software in the past week and a half, or don't any major changes that could cause this kind of problem.

Just browsing the internet, listening to music, and chatting for me.

vraxtus
Aug 19, 2004, 03:30 PM
Check out the pic below, from the number below, I should only be using 27.6% of my CPU, but the monitor sill says 100%.



I was thinking about re installing the OS, but I want to leave that as a last resort.

And why would the logic board cause this kind of problem? (if it in fact is the logic board)



Well... I was having some noticeably strange performance issues, more with the RAM however, and I found that kernel panics kept happening which were associated with logic board problems.

Sun Baked
Aug 19, 2004, 03:31 PM
Any updates in that time, sometimes they will send something off the deep end.

System Updates are usually really good at doing this if a program has a kext file.

titaniumducky
Aug 19, 2004, 03:59 PM
The tittle pretty much says it all.

Well, I don't know what to do.
I've repaid permissions twice.
Logged out.
Restarted twice.

When I go into the Activity Monitor, my CPU is running 100%, and 80%+ is coming from the System. I've tried to sort the processes by how much they use, but no single process is taking up more than 5%, and most of them read 0%.

It's not the Finder, as some other people have reported.

Any ideas?

btw, I've made :D sure to quit F@H. ;)

It is almost definitely NOT hardware related from the sounds of it. My guess is that there's a hidden process not showing up in Activity Monitor. Type "top -o cpu" in Terminal to run the process manager and sort entries by cpu. This may reveal something that Activity Monitor isn't showing. Hopefully this will help you out.

musicpyrite
Aug 19, 2004, 04:04 PM
Yes, I did update to 10.3.5 2 days ago.

But the problem seems fixed, I don't know what was causing it though.

I ran a hardware check, nothing
Repaired permissions
updated prebindings
daily, weekly, and monthly periodics

One of those seems to have fixed it.

So problme fixed for now. :)

Too bad it wasn't a logic board or something more important, I would have waited a few weeks to see if I could get one of those new G5 iMacs, but fat chance, I'd still probbably get a G4 :o

vraxtus
Aug 19, 2004, 04:09 PM
Yes, I did update to 10.3.5 2 days ago.

But the problem seems fixed, I don't know what was causing it though.

I ran a hardware check, nothing
Repaired permissions
updated prebindings
daily, weekly, and monthly periodics

One of those seems to have fixed it.

So problme fixed for now. :)

Too bad it wasn't a logic board or something more important, I would have waited a few weeks to see if I could get one of those new G5 iMacs, but fat chance, I'd still probbably get a G4 :o


Well I'm glad. I ran all those tests, and came up with nothing - did the clean install and still got panics, so mine was CERTAINLY hardware related.