Flash for ATI 2600XT necessary?

[Transporteur]

Hi there,

I've just read (here (http://forum.hardmac.com/index.php?showtopic=3130)) that it might not be necessary to flash a ATI 2600XT to work in a Mac Pro, can that be right?

I'd like to use such a card in a 2009 model because it's the only one that has two DVI ports and doesn't require additional power.

If it is unrealistic that it will run out of the box, is there any way to flash the card? I might get access to a PC if that would be required.

Cheers!

[Cindori]

the guy in that post has 1 mac 2600 and 1 pc 2600. the mac 2600 will initialize efi for the pc 2600 also.
a 2600 pc version by its own wont run.

[Transporteur]

Too bad. Is there any way to flash a PC version then?

[Cindori]

yes, you can use zeus, but you'll have to look for rom

[thepawn]

I used to run my 4870 with a GT120 for the secondaries, but then I switched to a HD2600XT and its been great....

I got a 512mb HD2600XT from this guy on ebay: http://shop.ebay.com/macvidcards/m.html?_nkw=&_armrs=1&_from=&_ipg=25

Though it looks like he's out of 2600's for now...there is a guy form Australia selling it for $115.

[Transporteur]

I'm currently running a 4870 and a GT120 as well (got the GT for 50 quid on ebay), but the miniDP is kind of restricting, which is why I intend to switch to the 2600 as well.

But seems to be very hard to get an Apple one these days, and getting a ROM for these old cards is almost impossible.

Initially the 5770 seemed to be a really good deal to replace both cards, but I'd have to replace all my adapters to get my displays running. Not worth it.

I guess I'll stay with the GT120 then.

[rtrt]

a

[Transporteur]

Actually, I'm not really familiar with the process of flashing graphics cards (not at all to be honest), so I'd rather not mess with your system. :o

But thanks for the offer! I really appreciate it!

[lie2me]

I just downloaded Zues to see what the application is about.

I presently have an Apple ATI 2600XT card in my Mac Pro v3,1.
I would like to add another to drive a third monitor.
It is a low power (50W) card which should generate less heat than others.

Can I read out the ROM from the presently installed card in the first slot and use it to flash an ATI 2600XT pc card in the second slot.

Otherwise, if not, what are we looking for?
Apple occasionally puts out firmware upgrades for the card.
Is that what we need to read and flash or is it incomplete?

Thanks for any replies in advance.
:)

[Cindori]

dump in win

[lie2me]

Hi Cindori:

You indicated that I can dump out the ROM from the Mac card using Windows and then flash the PC card using Zeus within Mac OSX.

I am running Parallels Desktop. Can I use that or do I actually have to boot up in Windows OS?

Thanks in advance.