Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Is there a screwdriver for the iphone 4 1st Gen?
- Thread starter devilstrider
- Start date
- Sort by reaction score
I thought so. But when I search I get 2nd gen and all that crap. Replacing my screen and I need the screwdriver for the launch unit screws.
iTzChasE
macrumors 6502
Good luck replacing your iPhone screen even though you can't figure out what kind of screws those are. :/
Phillips #00
http://www.amazon.com/E-flite-Screwdriver-00-Phillips/dp/B000BRLHWM
Phillips #00
http://www.amazon.com/E-flite-Screwdriver-00-Phillips/dp/B000BRLHWM
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
I know what kind it is I just wanted help finding a good link to order from. ifixit.com tells you that.
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
iTzChasE
macrumors 6502
Ok. Sorry about that then. Good luck.
Are you sure? I have always used a #00. #000 is too small and will strip the screw if you are not careful.
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5)
Go to a hardware store and buy a good #000 screwdriver.
I've had better luck with the #000 compared to #00
Go to a hardware store and buy a good #000 screwdriver.
I've had better luck with the #000 compared to #00
#00 is slightly too big but possible to use. #000 is often a better choice.
Either one will strip the screws if you aren't careful.
I got the #00. It's only $4 with shipping. If I need a #000 I'll check some local stores.