PDA

View Full Version : 2 LCD's Connected to a powerbook?




SweetOleMac
Jun 26, 2005, 06:28 PM
Hey Folks

Finally found out what one of the cables was for that came with my 15inc powerbook.

It was to enable me to connect a monitor to my MAC...doh
Should have read the manual :p

Now i have duel screens, is it possible to connect another monitor?

The way i have it is this

Powerbook>>LCD Monitor

Would it be possible for this?

LCD Monitor>>Powerbook>>LCD Monitor

Thanks



grapes911
Jun 26, 2005, 06:53 PM
Which video card do you have? The ATI 9700 has dual DVI support so you can drive the Apple 30 inch Display. I'd guess that it will power two separate monitors as well.

Capt Underpants
Jun 26, 2005, 06:53 PM
I know that there is no other way to hook up a monitor that is built in to the powerbook. You might be able to buy a 32 MB PC card slot video card and hook it up to that, but I've never tried this. Also, there seem to be some USB to VGA adapters that allow you to hook up an extra monitor, but the resolution is limited to 1280x1024 at best, and sometimes 1024x768.

SweetOleMac
Jun 26, 2005, 07:05 PM
Cheers Guys

i have the ATI Mobility Radeon 9700

I dont see any other connections on the latop to allow me a 2nd monitor connected.

I'll look into the USB to VGA adapters.

Thanks

TheMonarch
Jun 26, 2005, 07:27 PM
What about SVIDEO on one monitor> PowerBook < DVI monitor?
Possible?

robbieduncan
Jun 27, 2005, 03:57 AM
Which video card do you have? The ATI 9700 has dual DVI support so you can drive the Apple 30 inch Display. I'd guess that it will power two separate monitors as well.

Sorry, but you can't do that. The card can only power 2 screens, the internal one and one external one (even in clamshell mode it can only drive one external screen).

The external DVI can be Dual-Link (this was optional), but this does not mean that it is Dual (as in 2 screens).

1nsanity
Jun 27, 2005, 06:52 AM
Hello

Have you ever seen this ?
http://www.villagetronic.com/e_pr_vtbook.html

It's a pcmcia vga a dapter allowing a second monitor.

I just think its too bad my 12 inch pbook doenst have a pcmcia slot because I would of bought that adapter already!

Anyway hope this helps.

wwooden
Jun 27, 2005, 07:06 AM
Hello

Have you ever seen this ?
http://www.villagetronic.com/e_pr_vtbook.html

It's a pcmcia vga a dapter allowing a second monitor.

I just think its too bad my 12 inch pbook doenst have a pcmcia slot because I would of bought that adapter already!

Anyway hope this helps.

I don't know if any of you guys have ever heard of Smalldog.com, they are an Apple Specialist here in Vermont. They have on display, a PowerBook running two externals display, one using the regular DVI connector and the other using the VTBook PCMCIA adapter. Maybe it was just this computer they had, but it ran very slow. Just trying to stop the screen saver took a few seconds and Expose was virtually impossible. If I remember correctly, this was a 15" 1GHz Aluminum PB so maybe your newer computer would do better.

grapes911
Jun 27, 2005, 03:15 PM
The external DVI can be Dual-Link (this was optional), but this does not mean that it is Dual (as in 2 screens).

I wasn't sure. I figured I'd throw it out there anyway. Thanks for clearing it up.