PDA

View Full Version : Record player setup




AppleDApp
Sep 2, 2012, 11:26 AM
I've been contemplating the idea of investing in a proper stereo setup. I haven't tinkered with record players recently and all I remember was my mother cautioning my that I might scratch the vinyl with the needle.

What should I be looking for as far as components? I currently have a JVC stereo that is connected to my macbook pro. Could I use that same system and connect it to a record player?

what type of maintenance should I be aware of for vinyls and the record player itself?

How much room should I need? Are there any good resources I should read before investing?



Destroysall
Sep 2, 2012, 10:47 PM
How good is good for ya? Vinyl isn't cheap as people think. A halfway "decent" turntable (with or without a stock cartridge) can run you at about $500.

As far as speakers and amps go, you can't play a turntable without a dedicated phono amp (or in some cases, a built-in phono amp). So bear that in mind. Most receivers have this (i.e., Marantz AV Receivers).

However, this isn't to say you have to spend an arm and leg to get something decent. I would check out Marantz's website and browse through their Hi-Fi Components product section (http://us.marantz.com/us/Products/Pages/ProductListing.aspx?CatId=HiFiComponents&SubCatId=&SN=1&PN=1&SO=&PIds=). They have some turntables that are around the $330-$350 range, which seems reasonable.

Here's an example setup:

- Marantz TT42 (http://http://us.marantz.com/us/Products/Pages/ProductDetails.aspx?CatId=HiFiComponents&SubCatId=&ProductId=TT42)

- Marantz PM6004 (http://us.marantz.com/us/Products/Pages/ProductDetails.aspx?CatId=HiFiComponents&ProductId=PM6004)

So now we get to speakers, which really all draws down to you. I'd recommend you hear some if possible before making a purchase because only your ears will tell you what sounds good. I'd also recommend that you go for some floorstanders because they allow you to have a nice listening experience without having to make some room for a sub (not to say you don't need a sub though).

Well, there you are. I know it may seem a whole lot, but it is definitely worth it. Cheaper turntables break quickly and always seem to experience issues. With a "decent" one, you should be fine. :)

AppleDApp
Sep 2, 2012, 11:03 PM
How good is good for ya? Vinyl isn't cheap as people think. A halfway "decent" turntable (with or without a stock cartridge) can run you at about $500.

As far as speakers and amps go, you can't play a turntable without a dedicated phono amp (or in some cases, a built-in phono amp). So bear that in mind. Most receivers have this (i.e., Marantz AV Receivers).

However, this isn't to say you have to spend an arm and leg to get something decent. I would check out Marantz's website and browse through their Hi-Fi Components product section (http://us.marantz.com/us/Products/Pages/ProductListing.aspx?CatId=HiFiComponents&SubCatId=&SN=1&PN=1&SO=&PIds=). They have some turntables that are around the $330-$350 range, which seems reasonable.

Here's an example setup:

- Marantz TT42 (http://http://us.marantz.com/us/Products/Pages/ProductDetails.aspx?CatId=HiFiComponents&SubCatId=&ProductId=TT42)

- Marantz PM6004 (http://us.marantz.com/us/Products/Pages/ProductDetails.aspx?CatId=HiFiComponents&ProductId=PM6004)

So now we get to speakers, which really all draws down to you. I'd recommend you hear some if possible before making a purchase because only your ears will tell you what sounds good. I'd also recommend that you go for some floorstanders because they allow you to have a nice listening experience without having to make some room for a sub (not to say you don't need a sub though).

Well, there you are. I know it may seem a whole lot, but it is definitely worth it. Cheaper turntables break quickly and always seem to experience issues. With a "decent" one, you should be fine. :)

Great thanks for the tips. What's your take on buying a used turntable? Is there anything I should now as far as caring for the turntable itself? Asides from product pages, do you have links to article that might be able to inform me more on the subject?

garybUK
Sep 3, 2012, 07:38 AM
have a look at the projekt turntables, they are awesome and will last you in your discovery, they aren't too expensive but not too cheap, very well built.

I have a debut III into my naim setup through a Projekt phono amp and it sounds AWESOME. You can get some bargains on ebay etc, but i'd recommend going buying a new cartridge once you have it.

as for forums etc, have a look here: http://www.vinylengine.com/turntable_forum/index.php

AppleDApp
Sep 3, 2012, 08:02 PM
I might have access to a JVC QL-Y3F I would connect that to my home theatre system in my living room. It was fully automate but apparently now the tonearm motor doesn't work. Anyone know if that can be fixed at all?

Worst case if everything else is functional I could use that as a starting point to see if I like it. I would only have to buy a few more records.

I checked out the pro-ject Audio website and found this pre amp (http://www.project-audio.com/main.php?prod=tubebox&cat=boxes&lang=en)

http://www.project-audio.com/inhalt/bilder/tubebox.jpg

What does this do? Why does it have the light bulbs?

mjn298
Sep 3, 2012, 10:38 PM
check out the audiokarma forums

a lot of the posters there are audio guys who do repair/restoration work and can point you in the right direction as far as gear goes.. and often they have stuff to sell.

Destroysall
Sep 4, 2012, 12:44 AM
I might have access to a JVC QL-Y3F I would connect that to my home theatre system in my living room. It was fully automate but apparently now the tonearm motor doesn't work. Anyone know if that can be fixed at all?

Worst case if everything else is functional I could use that as a starting point to see if I like it. I would only have to buy a few more records.

I checked out the pro-ject Audio website and found this pre amp (http://www.project-audio.com/main.php?prod=tubebox&cat=boxes&lang=en)

http://www.project-audio.com/inhalt/bilder/tubebox.jpg

What does this do? Why does it have the light bulbs?
Pro-Ject makes some of the best phono amps out there. I got to hear them a few months back and they were gorgeous sounding!

Those "light bulbs" are tubes. The explanation of tubes and how the work for sound can be a lengthy one (http://www.vacuumtubes.net/How_Vacuum_Tubes_Work.htm). There are two types of amps (generally speaking) that you can choose from. Solid State, or Tube. Tube provides a lot of warmth for music. It adds a certain quality to sound that most Solid State amps can't replicate. This isn't to say Solid State amps are bad though.