PDA

View Full Version : Mac Harddrive not readable via external




peder
May 20, 2013, 12:39 PM
So my brother decided he wants a bigger harddrive for his MBP.

So i reconed no problem we will take out the old harddrive and then put in the new one, and put the old one into a external case, then he scores a extra external.

But now my problem is, i can't read the harddrive from the new install, though the moment i put the harddrive back into the MBP it works perfectly.

Is there any way to access the drive?

Thanks :)



Bear
May 20, 2013, 04:19 PM
If the external case you bought isn't working, return it and get a different one.

peder
May 20, 2013, 11:57 PM
i doubt its the external case, because i can read other drives and i prepared the drive in the case.

chown33
May 21, 2013, 12:45 AM
Put the new drive in the external case.
Put the old drive in the MBP.
Connect. Power up.
Copy entire old drive to new drive, using SuperDuper (free) or Carbon Copy Cloner (not free).
Shutdown.
Put new drive in MBP.
Power up MBP.
Confirm it starts up and works from the new drive.

If you have a problem at any step of the above, identify exactly which step. If you've already done the steps as listed, identify exactly which step failed. The way I read your post, you only put the new drive in the MBP, and the old drive in the MBP and the case, but not the new drive in the case.


Now you have the freedom of time to discover why the old drive doesn't work in the case. A good start would be to post:
- exactly what case it is (manufacturer, model, any options)
- exactly what the new drive is (again: manufacturer, model)
- exactly what the old drive is (manufacturer, model)
- exactly which MBP model it is (post the Model Identifier from System Information.app)

peder
May 21, 2013, 07:36 AM
Put the new drive in the external case.
Put the old drive in the MBP.
Connect. Power up.
Copy entire old drive to new drive, using SuperDuper (free) or Carbon Copy Cloner (not free).
Shutdown.
Put new drive in MBP.
Power up MBP.
Confirm it starts up and works from the new drive.

If you have a problem at any step of the above, identify exactly which step. If you've already done the steps as listed, identify exactly which step failed. The way I read your post, you only put the new drive in the MBP, and the old drive in the MBP and the case, but not the new drive in the case.


Now you have the freedom of time to discover why the old drive doesn't work in the case. A good start would be to post:
- exactly what case it is (manufacturer, model, any options)
- exactly what the new drive is (again: manufacturer, model)
- exactly what the old drive is (manufacturer, model)
- exactly which MBP model it is (post the Model Identifier from System Information.app)

It seems it must be the dock i was using.

Though the strangest part about it is that i could copy and access the new drive if i formatted it in the dock but if i formatted it in the pc it didn't read the drive.

I eventually got a Seagate dock and it seems to work perfectly without a hitch.

What would cause the one dock not to read the harddrive? Its the first time i have ever come accross this strange behaviour.