Apr 11, 2006, 09:20 PM
Ok, this is pretty technical, but maybe someone will be able to help me. My TiBook is being replaced with a "new" AlBook, and I figure I can take apart the old one and use it as a desktop (I have ideas). I'm looking to see if I can somehow power a fan with the Powerbook Ti logic board? I don't think there are any power connectors anywhere on it, has anyone heard of something like this being done before?
I don't really need the fan, but I'd like to add one to the project I'm going to work on with it. If anyone can think of how something like this could be done, I'm all ears.
Apr 12, 2006, 02:34 PM
Assuming your using a standard 80mm case fan like this one (http://www.newegg.com/Product/Product.asp?Item=N82E16835150007)....
There are a couple of options I see... The easiest and safest, I think, would to find an old AC->DC transformer like (the kind used to power cell phones, PDAs, switches, routers, etc.) this (http://akamai.globalsources.com.edgesuite.net/f/593/3445/5d/tradeshow.globalsources.com/trdshw/DownloadAttachment?attach_id=1494554). Make sure it outputs 12 volts, cut the end off the fan and transformer wire, and wire them up.
If that's not possible for what ever reason, you could use the power from USB, FireWire, PCMCIA, the hard drive, the optical drive, CPU/GPU fan, LCD, or some random lead on the motherboard.
USB would be the second choice, I think, safer and easier than any other. Unfortunately most of the things I listed above only output +5V. FireWire is variable from +8V to +30V but I have no idea how to control it. To use USB just find a female USB cable, splice the wires, hook up the USB's +5V wire to the fan, and plug the USB in. The down side is that your fan will spin slower than spec. (although it should be quieter) You might be able to use a transistor or voltage amplifier to bring it from +5V to +12V but I can't help you there.
Amperage might be a problem if your fan draws too much current. Check that to make sure.
Using your PowerBook's powerbrick thingy might also be an option.
Pinouts for some of your options:
Apr 12, 2006, 02:55 PM
Thanks! Yeah, USB seems like a logical way to go for this. I don't need high fan speeds, so it should work ok.
Thanks for your help.