PDA

View Full Version : 512MB PC133 Ram for my eMac?




neoelectronaut
Sep 12, 2006, 02:18 PM
Currently I'm running 768MB of ram, and I'm looking to swap out the 256MB for a 512MB stick, to squeeze that last bit of performance out of my machine.

Any reccomendations on where to get it for the best deal?

Should I look about eBay?



Old Smuggler
Sep 12, 2006, 02:22 PM
crucial has good ram
owc has 1gb sticks so you can upgrade to 2 gb
i have an emac also 1.25

DamoRed
Sep 12, 2006, 05:55 PM
I was very pleasantly surprised to find that Kingston value RAM, at a quarter of the price of Mac compatible, runs perfectly in my eMac!

It's been in a month now with absolutely no problems.

I paid €107 for Mac compatible 512MB and €27 for Kingston Value RAM. I really only bought it because of the cost, if it didn't work out alright, there was no much loss on it. I reckoned I couldn't pass it and NOT try it.

Hope this helps

TDM21
Sep 12, 2006, 06:09 PM
If you go looking for pc133 ram on ebay, make sure you find ram that is low density. High density pc133 ram won't work in macs. I've found that OWC (http://eshop.macsales.com) has a reasonable deal for 512MB ram: ~$68

neoelectronaut
Sep 12, 2006, 06:17 PM
Apple says that the 1Ghz eMacs max out at 1GB. Is this absolutely true or is it just their tested limit?

TDM21
Sep 12, 2006, 07:12 PM
Looking at the specs, its say your eMac only has two slots for memory. I've personally never seen a 1GB PC133 stick of memory and if there was, it probably was high density which is not compatible with Macs anyway. 1GB looks like the max for your system.

Valita
Sep 5, 2008, 03:19 PM
If you go looking for pc133 ram on ebay, make sure you find ram that is low density. High density pc133 ram won't work in macs. I've found that OWC (http://eshop.macsales.com) has a reasonable deal for 512MB ram: ~$68

I was looking for a lowcost solution to upgrading and went on ebay to check out if they had what i'm looking for and found the following:

512MB 64x64 non-ecc

PC133 133Mhz, 168 pin SDRAM
Unbuffered, Non ECC, Non Registered

7.5ns, 3.3v, CL 3 or CL 2

I want to know if the above is compatible with my eMAC and if I would be able to use 2 of these 512MB 64x64 non-ecc sticks.

Hardware Overview:

Machine Model: eMac
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
Memory: 256 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.6.4f1
Serial Number: YM3478AVPP1

thanx for your time :)

-val