Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

HW-Hack

macrumors newbie
Original poster
I'm wanting to pick up a Mac on the cheap - but one that will also be a bit peppy and I can do some upgrades to.

Ultimately I want a dual G4 1Ghz (or faster machine) looking at a quicksilver or the mirror doored models -- but having dual CPUs is key.

However I am very ignorant on the architecture of these machines. From what I've gleaned it seems like there is a separate CPU board that mates to the main board - and that CPU boards come in both dual or single configs.

Is this true ? Or is there just an empty socket on a single CPU system ?

And when did AGP slots come in on these machines ?

Thanks a bunch
 
I'm wanting to pick up a Mac on the cheap - but one that will also be a bit peppy and I can do some upgrades to.

Ultimately I want a dual G4 1Ghz (or faster machine) looking at a quicksilver or the mirror doored models -- but having dual CPUs is key.

However I am very ignorant on the architecture of these machines. From what I've gleaned it seems like there is a separate CPU board that mates to the main board - and that CPU boards come in both dual or single configs.

Is this true ? Or is there just an empty socket on a single CPU system ?

And when did AGP slots come in on these machines ?

Thanks a bunch

I have a Dual 1 GHz G4 Quicksilver, and its plenty quick.

Yes, it is a seperate board, called the CPU daughterboard. No, there isnt just a blank socket, as its one card, and if you have a Dual CPU machine, the two CPUs are soldered on the same card, about an inch away from each other.

Both the QS and MDD use AGP4X slots. If you hack a PC card (google themacelite) and install it, you'll have to tape or cut two pins off of the card, otherwise the machine will refuse to boot.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.