PDA

View Full Version : Help: Force iTunes to see iPhone



al256
Oct 5, 2007, 02:11 PM
After losing the ability to use my var folder,
http://forums.macrumors.com/showthread.php?t=363000
and archieve installing 10.4 onto my iMac, I can longer sync my iPhone to my iMac. iPods work just fine; and I can see the iPhone is seen on the System Profiler but iTunes does not. I have plugged it in on a hub and directly on the computer to no avail. All my backups for the iPhone are no longer in iTunes. Surely there must be a way to force it to sync again to my computer. Any help?


bdj21ya
Oct 5, 2007, 02:15 PM
Have you tried recovery Mode? (Hold down home and suspend for about 25 seconds (seems like forever) until a yellow triangle appears)

As a side not, I dislike archived installs.
al256
Oct 5, 2007, 02:19 PM
Have you tried recovery Mode? (Hold down home and suspend for about 25 seconds (seems like forever) until a yellow triangle appears)

As a side not, I dislike archived installs.

Will recovery mode endanger my data at all?

On a side note, I didn't have too much choice or information.
o JRoD o
Oct 5, 2007, 07:48 PM
Here is my trick that I use with my powerbook.

1. Close iTunes
2. Unplug the iPhone from your computer.
3. Power off the iPhone.
4. Connect the iPhone via usb to your computer.
5. After about 5 seconds the iPhone will power on.
6. Once the iPhone is back on, open iTunes. It should see your device.

Hope it works.
Jerod
al256
Oct 5, 2007, 07:55 PM
The solution lied in the fact that I need to reinstall AppleMobileDeviceSupport.pkg I had to download iTunes again and in the custom install options button I picked that package and fixed the problem. Hope this helps anyone searching the threads in need of this solution.
aftk2
Oct 5, 2007, 07:55 PM
You may also want to make sure you're plugging your iphone dock into the computer directly, rather than into a USB hub. My iphone wouldn't register until I did that, the last time I updated its software.
al256
Oct 5, 2007, 07:56 PM
You may also want to make sure you're plugging your iphone dock into the computer directly, rather than into a USB hub. My iphone wouldn't register until I did that, the last time I updated its software.

I actually connect the iPhone through a hub, and thankfully it works :)