Final Cut Express Problem

[skateeditmac]

After I capture a clip from my camera, it says," The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape." This makes the first second or two of the clip to be audioless, which means you can't hear it. How can I fix this problem?

[LethalWolfe]

Make sure your camera is set to record audio at 48k, 16-bit.


Lethal

[skateeditmac]

Make sure your camera is set to record audio at 48k, 16-bit.


Lethal

I know this sounds kind of stupid, but where would I find that?

[SELFsponsored]

In the menu on your video camera. It may be under audio settings in that menu. What type of camera?

[skateeditmac]

In the menu on your video camera. It may be under audio settings in that menu. What type of camera?

i have a canon elura 100.

[SELFsponsored]

when you are in camera mode, press the menu button and there should be some settings look for the audio and check the settings and match it to the previous post ^^^ up above

[skateeditmac]

when you are in camera mode, press the menu button and there should be some settings look for the audio and check the settings and match it to the previous post ^^^ up above

nevermind, I have fixed the problem

[aseeley]

How did you fix that problem?