Toggle sidebar Toggle sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

G-RAID does not mount...

Kingsly

Kingsly

macrumors 68040
Original poster
I have a 500GB G-RAID that does not mount. Can I pull out the drives and install them into another hardware RAID 0 enclosure or is the RAID map stored in the hardware itself?

Thanks.
 
That's a generic raid setup, so it should *work* in any setup. You may want to see if there's a problem with the Volume by using diskutility app and seeing if the members are online by putting this into the terminal: 'diskutil listraid' (without quotes).
 
The problem is it won't mount at all. I can hear the drives spin up and they sound healthy. I need to recover the data stored on the RAID, which is why I hope the RAID map is saved on a drive and not in the hardware controller.

If I get a new controller and hook up the drives, will the data show up or would I need to initialize and start fresh?
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back