PDA

View Full Version : Anyone know if I can put a 400mhz Tibook screen on a 1ghz Tibook body?




California
May 26, 2008, 01:34 AM
My former, babied, 400mhz overclocked by Daystar to 550mhz Titanium Powerbook has a fried logic board. Can I put a the old low resolution Tibook screen on a 1ghz Tibook body with a higher resolution screen?

Would it just power on at the lower resolution or is this just idiotic? Thanks



Shadow
May 26, 2008, 04:27 AM
Probably. I imagine the connectors are the same so it'd just be a matter of replacing the screen.

However, I have no experience with TiBooks at all, this is just a guess.

CaptainChunk
May 26, 2008, 04:45 AM
If the old TiBook was a 400MHz G4, then it's likely a Mercury or perhaps an early Onyx, if memory serves me correctly. These screens are not interchangeable with the 1GHz DVI models. The parts are slightly different, unfortunately.

garydailey
May 28, 2008, 10:41 AM
My former, babied, 400mhz overclocked by Daystar to 550mhz Titanium Powerbook has a fried logic board. Can I put a the old low resolution Tibook screen on a 1ghz Tibook body with a higher resolution screen?

No, sorry, you can't the 1GHz screens are far different. the inverter won't even light. the general rule on the tibooks, is to check the color of the inverter cable (white/pink vs white/black). If the colors match, then you have a chance.

A lot of companies sell used tibook screens. Try sales@Wegenermedia.com, sales@daystartechnology.com for starts.