PDA

View Full Version : Very recent MacPro revision POWER SUPPLY TEMPS/FAN SPEEDS




bird2jet
Jul 24, 2008, 02:05 PM
I just got my replacement MacPro today(the first one had something wrong with its firewire ports), and I notice a jump in the Powersupply fans up about 250 rpm, from 600 to 850; and a jump in temperatures of about 20 celcius for both monitors in Istatpro for the powersupply temps.

My first Macpro's power supply/power supply fan was 20 degrees cooler and ran at 250 less rpm.

Also I noticed something strange when I first plugged this new mac in. When I connected a live power cord into the Mac, I heard 2 strange clicks coming from the powersupply. It repeated these 2 clicks when I disconnected it and tried it again. Its like everytime the powersupply gets a live feed introduced to it after its been unconnected, the clicks are present.

Do you think the power supply is defective? The powersupply fans a whol?
I read a thread here where someone returned it for these readings and got a replacement but I really dont want to do that for a second time.

So the 2 clicks, the increased rpm, and increased temps now have me very frustrated as I just got this mac replaced because of faulty firewire ports. The only thing different however, is the powersupply activity. Temps such as the cpu areas actually seem cooler.

I would like to get some feedback from other users with the "clicking power supply" when introduced to a live power cord.

Perhaps its something like they forgot to remove a piece of plastic covering in the power supply fan area when it was built? That would explain the heat and fan, but not the clicking.

Ok, but can anyone confirm that under idle conditions there Power Supply TEMPS are 70/63 for PS1/PS2. And higher temps as high as 80/70.

My fan is running high, and my temps are running high.

Can anyone confirm these numbers and tell me there normal for ( it seems atleast) the most recent macpro builds.

Is there any program that will actually let you control the power supply fan?

From the first mac I had its fan for the PS was around 600rpm, this one base lines at 790rpm. The temps are around 20 C higher on average.

Thanks for reading.



jjahshik32
Jul 27, 2008, 11:46 PM
I just got my replacement MacPro today(the first one had something wrong with its firewire ports), and I notice a jump in the Powersupply fans up about 250 rpm, from 600 to 850; and a jump in temperatures of about 20 celcius for both monitors in Istatpro for the powersupply temps.

My first Macpro's power supply/power supply fan was 20 degrees cooler and ran at 250 less rpm.

Also I noticed something strange when I first plugged this new mac in. When I connected a live power cord into the Mac, I heard 2 strange clicks coming from the powersupply. It repeated these 2 clicks when I disconnected it and tried it again. Its like everytime the powersupply gets a live feed introduced to it after its been unconnected, the clicks are present.

Do you think the power supply is defective? The powersupply fans a whol?
I read a thread here where someone returned it for these readings and got a replacement but I really dont want to do that for a second time.

So the 2 clicks, the increased rpm, and increased temps now have me very frustrated as I just got this mac replaced because of faulty firewire ports. The only thing different however, is the powersupply activity. Temps such as the cpu areas actually seem cooler.

I would like to get some feedback from other users with the "clicking power supply" when introduced to a live power cord.

Perhaps its something like they forgot to remove a piece of plastic covering in the power supply fan area when it was built? That would explain the heat and fan, but not the clicking.

Ok, but can anyone confirm that under idle conditions there Power Supply TEMPS are 70/63 for PS1/PS2. And higher temps as high as 80/70.

My fan is running high, and my temps are running high.

Can anyone confirm these numbers and tell me there normal for ( it seems atleast) the most recent macpro builds.

Is there any program that will actually let you control the power supply fan?

From the first mac I had its fan for the PS was around 600rpm, this one base lines at 790rpm. The temps are around 20 C higher on average.

Thanks for reading.

Oh that clicking noise! Yea if I disconnect or reconnect the power plug it does make a click noise (I remember my first mac pro never did that too the same 2.8ghz 8 core model).

Another thing I noticed too is that in geekbench running in at 32-bit the older 2.8ghz 8 core model would give me nothing more than a total of 7700-7800 geenbench score and now I've ran it 6 times and it always gave me a 8300-8400! This is strange but I'll take it~!

bird2jet
Jul 28, 2008, 12:01 AM
Well the clicking noises are related to the capacitors in the PSU, but its strange nonetheless as my first MP had no clicking noises either.

http://discussions.apple.com/thread.jspa?threadID=1617836&tstart=60

tugger
Jul 28, 2008, 01:21 PM
At idle with 26C ambient:

Power Supply temps:
Location 1: 45C
Location 2: 42C

Fan Speeds:
CPU/MEM: 498
I/O: 798
Exhaust: 599
Power Supply: 659

bird2jet
Jul 28, 2008, 01:35 PM
I think yours may be an earlier 2008 revision. Mine is exactly 20 C higher on both readings, and the fan speed is up 250rpm from 600.

Infrared
Jul 28, 2008, 05:52 PM
http://forums.macrumors.com/showthread.php?t=446064