View Full Version : AppleDesign Powered Speakers
redrock505
Apr 15, 2009, 02:49 PM
I have the old AppleDesign Powered Speakers, model #M6082, but I need the 15V power supply. Does anybody have specs for this item or know where it can be purchased? Thanks.
rdowns
Apr 15, 2009, 03:00 PM
Those were sweet, made by Bose IIRC.
A universale Ac adapter from Radio Shack should do the trick for you.
redrock505
Apr 15, 2009, 05:13 PM
In my search for info, a poster on one forum suggested the Radio Shack wouldn't be of any help, so I haven't even tried there. Thanks for the suggestion. That would be a very simple resolution if it works.
MacTech68
Apr 15, 2009, 11:10 PM
I have the M6082 and the AC adapter is rated 15VDC (as printed on the speakers) and is rated at 1 Amp.
A third party adapter should be fine if you can find one rated to 1Amp
:)
EDIT: the difficulty will be finding the DC Plug. Similar plugs of a lower power rating (smaller diameter centre pin) are found on older Canon bubblejet printers
This connector is a RC-5320A either a type 4 or 5. I'll see if I can find out which type.
EDIT 2: If my eyes are correct (sorry don't own a good vernier caliper) it looks like it's type 5.
EDIT 3: Here is one supplier. You may be able to find others:
http://www.laptopsockets.co.uk/dc-jack-new/dc42.htm
EDIT 4: perhaps easier (though you buy a packet of 5) is RS Components (http://www.rs-components.com/index.html) Part # 294-7024
________
pot news (http://potwire.com)
Mac SK
Apr 16, 2009, 12:25 AM
Go to your local thrift store. The ones I visit have boxes of used adapters, like 50 cents or a Dollar each. You dig and see what you can find. I had some of them speakers and gave them back to the old thrift store. Good luck to ya.:)
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.