PDA

View Full Version : Linksys EG1032 in G4 tower not running Gigabit




zmttoxics
Jun 3, 2009, 09:33 AM
I had some spare network cards with realtek chipsets so I thought I would try them out in the g4. The first card is a 10/100 card and does 7MB/s during transfer, which isn't too bad for a random 10/100 card I found. The EG1032 how ever is a gigabit card and only pulls in 9MB/s which is still in the 100baseT range.

Now, I am thinking my overclocked G4 is fast enough for this (533mhz with 133mhz fsb) because its running the same speed as a Gigabit G4. The harddrives are 7200rpm, and the switch / other computer are all gigabit. I even tried straight through from my Macbook to the G4. This leads me to believe its a driver or card problem.

What are your thoughts?

Here is my ifconfig ouput:
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::214:bfff:fe5e:db72%en2 prefixlen 64 scopeid 0x6
inet 10.10.151.180 netmask 0xffffff00 broadcast 10.10.151.255
ether 00:14:bf:5e:db:72
media: autoselect (1000baseT <full-duplex>) status: active
supported media: 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,flow-control> autoselect