Would an external Hard Drive at 7200 RPM's be able to run at full speed using Fire Wire 400? Or would the speed of the Fire Wire slow it down? I am guessing USB 2.0 would be slightly better in this case, but not as good as Fire Wire 800.
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
External 7200 RPM HD w/ FireWire 400?
- Thread starter ShaggyLR
- Start date
- Sort by reaction score
I think both USB 2 and (of course) FW 400 will allow your drive to run at full speed. No problems with FW 400.
JOD8FY
JOD8FY
Just to speak numbers:
FW400 = 400Mb/sec = 50MB/sec
FW800 = 800Mb/sec = 100MB/sec
USB 2.0 = 480Mb/sec = 60MB/sec
These numbers are theoretical, and many tests have proven that Firewire is more efficient at handling mass storage than USB 2.0.
And, even though the interface of the latest drives is 150MB/sec (for Serial ATA), 133 MB/sec (ATA-133), and 100MB/sec (ATA-100), the drive itself can only sustain a rough transfer rate of 40MB/sec.
FW400 = 400Mb/sec = 50MB/sec
FW800 = 800Mb/sec = 100MB/sec
USB 2.0 = 480Mb/sec = 60MB/sec
These numbers are theoretical, and many tests have proven that Firewire is more efficient at handling mass storage than USB 2.0.
And, even though the interface of the latest drives is 150MB/sec (for Serial ATA), 133 MB/sec (ATA-133), and 100MB/sec (ATA-100), the drive itself can only sustain a rough transfer rate of 40MB/sec.
FW400 would not be a good choice if you have a machine with FW800.
FW800 would allow the drive to operate at full speed.
The FW400 drive cases probably will not, at least that's the way they tested.
The same drive in a FW400 and FW800 tested faster in the FW800 case -- so the old FW400 chips and/or overhead do take a toll on performance.
--- http://www.barefeats.com/usb2.html
Don't know if the FW800 cases tested better on a FW400 machine or not (to see how bad the Oxford 911 chipset really was).
FW800 would allow the drive to operate at full speed.
The FW400 drive cases probably will not, at least that's the way they tested.
The same drive in a FW400 and FW800 tested faster in the FW800 case -- so the old FW400 chips and/or overhead do take a toll on performance.
--- http://www.barefeats.com/usb2.html
Don't know if the FW800 cases tested better on a FW400 machine or not (to see how bad the Oxford 911 chipset really was).