PDA

View Full Version : Restore to USB drive Ibook G4




ThBrokn
Jul 1, 2009, 03:35 PM
I have a question for all you mac people out there :)

I just aquired a new old Ibook G4 and extremley excited but it only has a 30GB hdd and a "CdRom" My question is

I have a 100GB drive that im going to put in there, if i were to say partition the drive in two via a usb adapter and restore the leopard image "Family Pack" to a small 10GB partition and then put the drive in the ibook will i be able to boot off that leopard install partition?



yellow
Jul 1, 2009, 03:39 PM
Depends on which one it is.

According to MacTracker, the 800MHz maxes out at 10.4.11, any later model can run Leopard. Though, from personal experience running anything later than Tiger will be painful.

ThBrokn
Jul 1, 2009, 03:44 PM
It is the 1GHZ model 12" with 768MB's of ram and already has leopard on it, runs very well imho

yellow
Jul 1, 2009, 03:53 PM
<-- speed elitist.

OK, so yes a partition will work fine.. though I would suggest something larger than 10GB.

1) Applications will take up space and I expect you'll want to install more and more over time?
2) Swap. You want space on the disk for virtual memory.
Running out of disk space on your boot drive will be annoying, I promise.

You could clone your current installation to the partition with SuperDuper! and save yourself some time, unless you want a vanilla reinstall.

ThBrokn
Jul 1, 2009, 04:02 PM
<-- speed elitist.

OK, so yes a partition will work fine.. though I would suggest something larger than 10GB.

1) Applications will take up space and I expect you'll want to install more and more over time?
2) Swap. You want space on the disk for virtual memory.
Running out of disk space on your boot drive will be annoying, I promise.

You could clone your current installation to the partition with SuperDuper! and save yourself some time, unless you want a vanilla reinstall.

Oh no i mean im going to restore my leopard dvd image to the 10GB usb partition, then pop the drive inside the machine use the leopard install partition as the startup disk then install leopard to my second partition the 85GB :) is that possible? or can i do superduper to a usb and will it be bootable even though its a usb drive?

MultiFinder17
Jul 1, 2009, 04:51 PM
That should work; I know a couple of people that've done similar things to get Leopard on their DVD-less machines.

old-wiz
Jul 1, 2009, 06:06 PM
I don't think the PPC macs will boot from usb, only Intel.
External disks for PPC have to be firewire to be bootable.

MultiFinder17
Jul 1, 2009, 07:23 PM
He's not planning on booting via USB; he's just putting the drive in an external case, putting the contents of the Leopard DVD on it, then sticking the drive int he iBook to install from the imaged DVD.

OrangeSVTguy
Jul 2, 2009, 08:04 AM
If you want it as small as possible, you'll need at least 7.2gb if you want to restore your install image to a hard drive. You can find a guide here. (http://www.macfixit.com/article.php?story=20071101112529955)

Don't plan on trying to boot from that partition from a usb enclosure though. It needs to be Firewire. Why not just clone your existing 30gb hard drive to the 100gb via your USB enclosure so you only have one partition? SuperDuper! (http://tc.versiontracker.com/product/redir/lid/1626948/SuperDuper!.dmgSuperDuper) is a great utility for the job.

ThBrokn
Jul 2, 2009, 10:38 AM
If you want it as small as possible, you'll need at least 7.2gb if you want to restore your install image to a hard drive. You can find a guide here. (http://www.macfixit.com/article.php?story=20071101112529955)

Don't plan on trying to boot from that partition from a usb enclosure though. It needs to be Firewire. Why not just clone your existing 30gb hard drive to the 100gb via your USB enclosure so you only have one partition? SuperDuper! (http://tc.versiontracker.com/product/redir/lid/1626948/SuperDuper!.dmgSuperDuper) is a great utility for the job.


This will work? I tried yesterday and it said cannot make bootable on a usb drive. :(

OrangeSVTguy
Jul 2, 2009, 10:59 AM
This will work? I tried yesterday and it said cannot make bootable on a usb drive. :(

Then I'd suggest purchasing a Firewire enclosure. This one works great. (http://cgi.ebay.com/Mini-Drive-2-5-Hard-Drive-Enclosure-Firewire-USB-2-0_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a4Q7c39Q3a1Q7c72Q3a1205Q7c293Q3a1Q7c294Q3a200QQ_trksidZp 3286Q2ec0Q2em14QQhashZitem20ac5cf587QQitemZ140330726791QQptZPCCQ5fDrivesQ5fStorageQ5fInternalQQsalen otsupported)

ThBrokn
Jul 2, 2009, 02:35 PM
Will do, i also purchased the 12" super drive for it too :) woo woo. thanks guys.