View Full Version : Hoovering iMac Vents
jackmileshunt
Jul 13, 2010, 11:01 AM
Hi,
I have an Aluminium iMac from 2007, it has had heavy use. I have been looking into opening it to clean it, but i'm not willing to take the risks. So, is it safe to hoover both of the vents on the back, and the RAM bay?
I'm kinda worried about the static.
Thanks in advance. :)
Eduardo1971
Jul 13, 2010, 12:05 PM
Thread Hijack:
That's cool "Hoovering".
We call it "vacuuming".:)
End highjack:
jackmileshunt
Jul 13, 2010, 12:19 PM
Thread Hijack:
That's cool "Hoovering".
We call it "vacuuming".:)
End highjack:
Hijack has two spellings? :D
brdnboy
Jul 13, 2010, 01:35 PM
Shouldn't be issue. Make sure to use a plastic hose and tip though. You wouldn't want anything conductive (metal) to discharge static electricity near or in the computer. Also, clean the bottom vent thoroughly first before you do the top back vent. The air (and dust) is drawn in from the bottom and you will want to remove it the same way it came in. If you vacuum the top first you could pull all the dust and things in even further.
mrsir2009
Jul 13, 2010, 02:47 PM
Yeah go ahead. Probably be a good idea to turn it off first, then vac the bottom vent (under the iMac). And then the top one (behind it).
aki
Jul 13, 2010, 06:34 PM
I speak from ignorance, but is that honestly safe? I had read in other threads (not that I have one to quote, true) that vacuuming the vents was a bad idea (static, air too powerful).
mrsir2009
Jul 13, 2010, 08:28 PM
I speak from ignorance, but is that honestly safe? I had read in other threads (not that I have one to quote, true) that vacuuming the vents was a bad idea (static, air too powerful).
Just use an all plastic vac. And, you can always just turn the vac power down?
aki
Jul 13, 2010, 08:45 PM
Ok I finally found the thread I was thinking about about vacuum cleaners and electronics. Some interesting information. The original hint is pretty old but presumably the info re static etc is still current. Unfortunately I don't have the tech expertise to have my own opinion but it's worth at least a skim for anyone who is considering dust-clearing options.
http://www.macosxhints.com/article.php?story=20060401085713897
Also, a useful thread here: http://discussions.apple.com/thread.jspa?threadID=575828.
jackmileshunt
Jul 14, 2010, 06:22 PM
Cheers for the responses. I am in two minds now, to risk, or not to risk. The computer gets very hot, so it is at risk of overheating anyway, right?
But I don't want to loose my computer. Hmm.
TMRaven
Jul 14, 2010, 06:29 PM
You're saying it gets very hot, and are asking if it's overheating, but aren't providing temps. :(
http://www.youtube.com/watch?v=xHS-fOaO87w
aki
Jul 14, 2010, 10:33 PM
Based on everything I have read, were I in your clogs, I would probably either take it to someone professional to get it cleaned (yes, that sounds excessive at first blush; but it seems like the only proper way to do it and do it safely and productively is to pop the back, and that popping the back on modern iMacs is a non-trivial operation); or go the smcfancontrol route and make sure the fanspeeds are suitable for the temps I am seeing.
It is a bit of a disadvantage of the design of the modern iMac that the user can't clean it really.
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.