Apple peripheral devices may request more than 500 mA (Milliamps) at 5 V (Volts) from a port to function or to allow for faster charging. Such Apple peripheral devices include:
Apple MacBook Air SuperDrive (when connected to supported computers)
Aluminum Wired Keyboard*
iPod
iPhone
iPad
To meet requests for additional power from these Apple peripherals and devices, some Apple computers and displays can provide up to 1100 mA at 5 V through the port to which the Apple peripheral or device is connected. This power is available under certain conditions:
An Apple peripheral device must be plugged directly into an Apple computer or display. Apple peripheral devices connected to hubs will not have access to extra power above the standard USB specification of the port the device is connecting to (500 mA for USB 1.1 or 2, 900 mA for USB 3).
Your Apple computer or display must be powered on and must be awake. If your Apple computer or display is asleep, all ports will provide their normal maximum output. If your Apple computer or display is powered off, no power will be provided.
The port providing extra power is determined by the first Apple peripheral or device to connect to the Apple computer or display that requires power beyond 500 mA for USB 1.1 or 2, or 900 mA for USB 3. The remaining ports will continue to offer their normal maximum output. Some Apple computer and displays may offer the ability to operate more than one USB port at 1100 mA at 5 V. On those computers, the second or third port is enabled when an appropriate device is connected.
An Apple computer started up to Windows via BootCamp will not provide extra power.
*When connected to a computer that supports a connection of 1100 mA at 5 V, the first port on the keyboard to have a device or peripheral connected to it that requests standard 500mA power will receive that power. At that point, 100 mA at 5 V is available through the remaining port on this keyboard. This keyboard does not support extra power out of its two ports simultaneously; it requests extra power from the host computer to provide power out of either one of its two ports, then the second keyboard port receives the standard 500mA.
Note: Apple computers and displays that were introduced before 2007 support only 500 mA at 5 V from their ports and do not offer additional power.