Oh NO - Powerbook Kernal Panics....

Powerbook has just required 3 hardstarts each one preceeded by unplugging new SE phone from it. Got this report, any ideas or insight would be much cool...



Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x00000000FFFFFFFF PC=0x0000000000000000
Latest crash info for cpu 0:
Exception state (sv=0x3AF66780)
PC=0x00000000; MSR=0x40009030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00000000; R1=0x17873810; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x00000000 0x00000000
backtrace terminated - unaligned frame address: 0x01F06318

Proceeding back via exception chain:
Exception state (sv=0x3AF66780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2D6AA780)
PC=0x000ACC84; MSR=0x00009030; DAR=0xE0016000; DSISR=0x42000000; LR=0x000AB598; R1=0x17873BF0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000AB554 0x0006DA10 0x0001C2B0 0x0001C620 0x00022628 0x000227B8
0x000A9694
Exception state (sv=0x2DB5AA00)
PC=0x9000A778; MSR=0x0200D030; DAR=0x007FB014; DSISR=0x42000000; LR=0x9000A6BC; R1=0xBFFFCB20; XCP=0x00000030 (0xC00 - System call)

Kernel version:
Darwin Kernel Version 8.2.0: Fri Jun 24 17:46:54 PDT 2005; root:xnu-792.2.4.obj~3/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095544 0x00095A5C 0x0002683C 0x000A819C 0x000ABB00
Proceeding back via exception chain:
Exception state (sv=0x3AF66780)
PC=0x00000000; MSR=0x40009030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00000000; R1=0x17873810; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x00000000 0x00000000
backtrace terminated - unaligned frame address: 0x01F06318

Exception state (sv=0x2D6AA780)
PC=0x000ACC84; MSR=0x00009030; DAR=0xE0016000; DSISR=0x42000000; LR=0x000AB598; R1=0x17873BF0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000AB554 0x0006DA10 0x0001C2B0 0x0001C620 0x00022628 0x000227B8
0x000A9694
Exception state (sv=0x2DB5AA00)
PC=0x9000A778; MSR=0x0200D030; DAR=0x007FB014; DSISR=0x42000000; LR=0x9000A6BC; R1=0xBFFFCB20; XCP=0x00000030 (0xC00 - System call)

Kernel version:
Darwin Kernel Version 8.2.0: Fri Jun 24 17:46:54 PDT 2005; root:xnu-792.2.4.obj~3/RELEASE_PPCModel: PowerBook5,6, BootROM 4.9.1f1, 1 processors, PowerPC G4 (1.2), 1.67 GHz, 1 GB
Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 64 MB
Memory Module: SODIMM0/J25LOWER, 512 MB, DDR SDRAM, PC2700U-25330
Memory Module: SODIMM1/J25UPPER, 512 MB, DDR SDRAM, PC2700U-25330
AirPort: AirPort Extreme, 400.17 (3.90.34.0.p11)
Modem: Jump, , V.92, Version 1.0,
Bluetooth: Version 1.6.0f2, 2 service, 0 devices, 1 incoming serial ports
Network Service: Internal Modem, PPP (PPPSerial), modem
Network Service: AirPort, AirPort, en1
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITADVD-R UJ-845E,
Parallel ATA Device: FUJITSU MHT2080AH, 74.53 GB
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard/Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA

Applespider said:

Download iGrabber

It's something to do with a kext file that isn't yet there for the new SEs so you need to add it. Thankfully some clever chap in Aachen, Germany has done so - install it and one restart later you'll be able to plug/unplug quite happily.

Click to expand...

iGrabber works. Thanks AppleSpider. You are a help resource forum in your own right!