I don't know how many of you are in the same situation as me, but I have a few Apple devices I'd like to play my media on. I'd also like to have only 1 file that plays across all the platforms and has the best quality/size ratio possible. I've looked online for such a solution but found mixed results so I've decided to run my own tests using the newly released HandBrake version 0.9.2
I'm testing the files on various devices. They are as follows:
My hardware is a MacBook with a 2Ghz Core 2 duo and 3GB of RAM. I'm ripping chapter 1 of the "Groundhog Day" widescreen DVD which has 5.1 audio and multiple languages. For quality, I always do 2-pass encoding as it helps immensely with fast scene changes. For benchmark purposes, I get 60fps average on the 1st pass and 19fps average on the 2nd pass at the 1500 kbps bitrate.
Alright here's my results placed into a nice easy to read chart. Basically what I can gather is that the HandBrake team has done a great job in terms of compatibility and that Apple has understated the iPhone/iPod's potential. I'm happy to find that both my iPod and iPhone were able to handle the full sized anamorphic DVD rip with 4 audio tracks (AAC and AC3).
The settings I choose were based off the "iPod High" preset. My rationale for the tested resolutions is based off Apple's published iPhone/iPod specs. http://www.apple.com/iphone/specs.html According to them, the max resolution the iPhone can handle is 640x480 @ 1500kbps. I found out what this actually means is that the max pixel count the iPhone can handle is 307,200 pixels (640 times 480). So the 720x400 was the highest you can get a widescreen rip (non-anamorphic) and still be under the max pixel count (288,000 px).
Surprisingly though, the iPhone/iPod were able to handle the full resolution 708x466 (329,928 px) without complaints. Since the resolution limit was higher that I expected, I decided to test other bit-rates as well. I tried both 2500 and then 5000kbps. The results are as follows.
Important note: You HAVE to choose the iPod/iPhone preset first and crank up the setting from there if you want to get these high quality cross-device files. If you choose the Apple TV preset and go from there they won't work. I'm guessing it's got something to do with the advanced flags. Also, it didn't matter if I checked the "iPod Atom" flag or not. I'm not sure anymore what it's for, maybe some older iPods require it but I don't have any to test with.
Here's the results:
Extrapolating the data, the average sizes for a 90 minute movie file should be as follows:
OK so conclusions. Looks like the devices can handle much more than I thought they could. I've done tests before and it used to be I couldn't get the anamorphic or the higher bitrate files to play on my iPhone. So it looks like I can start upping the quality of my rips and not worry about compatibility. On the downside, my previous rips now feel old and outdated lol.
The settings I'll probably use on movies from now on are the Anamorphic Strict setting for the highest resolution possible and 2500kbps video. I did always feel 1500 was lacking clarity on the Apple TV so it's nice to be able to increase that. 5000kbps seems like over kill to me since I can't really notice a difference between that and 2500kbps. It's also pushing the 4GB file limit people seem to run into trouble with. I'll leave the 5000+AC3 for my HD rips, those can really benefit from it.
Still not sure about audio since it only benefits the Apple TV. The size jump is also quite high for the high quality AC3 tracks. I'd rather have 2 different languages than the 5.1 surround sound with the added size penalty. But that's just personal choice.
The results are not conclusive as I have yet to try a full screen DVD and one of those ultra widescreen DVDs, but given the iPhone/iPod outperformed, I think I'll find similar results with those.
I'm testing the files on various devices. They are as follows:
- iTunes 7.6
- Apple TV Take 2
- iPhone with 1.1.3 Firmware
- 3g iPod nano with 1.1. Firmware
My hardware is a MacBook with a 2Ghz Core 2 duo and 3GB of RAM. I'm ripping chapter 1 of the "Groundhog Day" widescreen DVD which has 5.1 audio and multiple languages. For quality, I always do 2-pass encoding as it helps immensely with fast scene changes. For benchmark purposes, I get 60fps average on the 1st pass and 19fps average on the 2nd pass at the 1500 kbps bitrate.
Alright here's my results placed into a nice easy to read chart. Basically what I can gather is that the HandBrake team has done a great job in terms of compatibility and that Apple has understated the iPhone/iPod's potential. I'm happy to find that both my iPod and iPhone were able to handle the full sized anamorphic DVD rip with 4 audio tracks (AAC and AC3).
The settings I choose were based off the "iPod High" preset. My rationale for the tested resolutions is based off Apple's published iPhone/iPod specs. http://www.apple.com/iphone/specs.html According to them, the max resolution the iPhone can handle is 640x480 @ 1500kbps. I found out what this actually means is that the max pixel count the iPhone can handle is 307,200 pixels (640 times 480). So the 720x400 was the highest you can get a widescreen rip (non-anamorphic) and still be under the max pixel count (288,000 px).
Surprisingly though, the iPhone/iPod were able to handle the full resolution 708x466 (329,928 px) without complaints. Since the resolution limit was higher that I expected, I decided to test other bit-rates as well. I tried both 2500 and then 5000kbps. The results are as follows.
Important note: You HAVE to choose the iPod/iPhone preset first and crank up the setting from there if you want to get these high quality cross-device files. If you choose the Apple TV preset and go from there they won't work. I'm guessing it's got something to do with the advanced flags. Also, it didn't matter if I checked the "iPod Atom" flag or not. I'm not sure anymore what it's for, maybe some older iPods require it but I don't have any to test with.
Here's the results:
Extrapolating the data, the average sizes for a 90 minute movie file should be as follows:
- All@1500kbps, 2x AAC: 1,188 MB
- All@1500kbps, 1x AAC, 1x AC3: 1,360 MB
- All@1500kbps, 2x AAC, 2x AC3: 1,620 MB
- Anamorphic @ 2500: 2,340 MB
- Anamorphic @ 5000: 4,000 MB
OK so conclusions. Looks like the devices can handle much more than I thought they could. I've done tests before and it used to be I couldn't get the anamorphic or the higher bitrate files to play on my iPhone. So it looks like I can start upping the quality of my rips and not worry about compatibility. On the downside, my previous rips now feel old and outdated lol.
The settings I'll probably use on movies from now on are the Anamorphic Strict setting for the highest resolution possible and 2500kbps video. I did always feel 1500 was lacking clarity on the Apple TV so it's nice to be able to increase that. 5000kbps seems like over kill to me since I can't really notice a difference between that and 2500kbps. It's also pushing the 4GB file limit people seem to run into trouble with. I'll leave the 5000+AC3 for my HD rips, those can really benefit from it.
Still not sure about audio since it only benefits the Apple TV. The size jump is also quite high for the high quality AC3 tracks. I'd rather have 2 different languages than the 5.1 surround sound with the added size penalty. But that's just personal choice.
The results are not conclusive as I have yet to try a full screen DVD and one of those ultra widescreen DVDs, but given the iPhone/iPod outperformed, I think I'll find similar results with those.