Bootcamp eSATA BOOT "Crashing with B.C. driver's"

Need Help, Crash after reboot with BootCamp drivers 64 Bit. Can anybody please help me and explain why this happening.

Mac Pro G5 model 4.1 early 2009 with 16GB ram OSX 10.6.4, WIndows7 64 BIT

Single eSATA drive partition /dev/sda1 Windows 7 /dev/sda2 ubuntu using MAster BOOT Record in PCI Slot 3

Slot 1 Radion ATI 4870 1024 x 2 Graphic's card & Slot 2 i'm using 2 500GB slice RAID 0 eSATA with HighPoint Rock RAID eSATA for MAC card with OSX 10.6.4 boot as 1st partition.

NewerTech MAXPower eSATA 6G PCIe 2.0 Controller Card "only bootable BIO Windows AHCI" http://www.newertech.com/products/pcieesata.php

I use "johnsock's script in "Terminal" found here http://osx86.co/f74/how-to-boot-mac-pro-in-ahci-mode-t3159/

Works with reFIt, im able to boot Windows 7 64 BIT & UBUNTU 10.10 AMD 64 beta & 10.04. I plan on using 10.10, GM will be release on 10/10/2010. i figure i would go ahead install beta. When crash kept happening i went back to 10.04 to see if that was problem. last few times i haven't had UBUNTU install.

Ever thing runs great up until BootCamp 3.1 drivers are install from OSX DVD or manually with administrator permission.

Error log has this once i boot back to Win 7 in safe mood "i've look it up and most post say's hardware issue. I've run several utilities in OSX all reports come back with out any errors. The crash only happens after reboot in Windows after i install BootCamp Drivers. I also ran disk repair in OSX with paragon driver to see if it would fix the issue, no luck.

------------------------------------------

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 34
BCP1: 0000000000000107
BCP2: FFFFFFFFC0000420
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\092710-38469-01.dmp
C:\Users\wbs\AppData\Local\Temp\WER-56253-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

--------------------------------------------------

i've tried that also but not with 7-zip, i use winRAR 64. I stated this project over week ago with out RockRaid. I purchase rockraid on Friday, hoping to solve problem. I was mis-lead i think, im not going to beable to use it for triple boot with all 3 OS's. I plan on researching it later today to see if thats possibilty. So far im not able to get windows EFI BIO to install with rockraid. I was having same problem with NewerTech all week long. i only bought Rockraid because it was bootable OSX was hoping it would solve my problem. I need to get Windows install on eSATA. All 4 bays plus Spare optical bay is being used in RAID 0.

oh, sorry about the "G5" i didn't realize Apple change it with Intel processor.

It's MacPro 4.1 8 core 2.26GHz x2 (early 2009)

I'm not sure about the driver, im only install 64 Bit from the folder that says (x64) it contains bluetooth, keyboard, & etc .... Also the intel driver.

Ok, ill try that tonight and post results. Do you know which driver that allows you to see the OSX drive? Thanks for help

I forgot to post this, in "johnsock's script in "Terminal" it says to

- Run Regedit
- Navigate to "HKLM\System\CurrentControlSet\Services\msahci "
- edit the "Start" key and change the value from what it is to "0"
- this will tell Vista to check for AHCI on next boot and install the AHCI driver if it is in AHCI mode
- this installs the generic AHCI Microsoft driver and it is really a poor driver for your hardware and you will need the Intel ones to get full performance.

It says to use this Driver ""Intel® 631xESB/6321ESB Ultra ATA Storage Controller - 2680"

Which Im not able to install.

External eSATA Boot update

So far so good with 64BIT driver's from x64 folder. i only install ones i thought i would need. I use 7-zip this time, with backup Win7 OS Paralle 6.0 virtual image. Posting screen shots, any advice to help would be appreciated.

Here are issue's i like to try to solve.
# unable to access any drives except the external eSATA drive which Windows 7 Pro is install. I install Paralle 6 in OSX & tools hoping it would allow me to access my OSX drives, using share feature. It doesn't work.

# after i install or update, the reboot hangs and i have to shut CPU down. Only way to boot up, i have to turn off Windows Drive. BOot up to external eSATA RAID 0 OSX drive with rEFIT. Then turn on Windows Drive reboot then able to boot Win7 with rEFIT. Key note, i have Tinker Tools 2 install with mount external drive before log-in turn on.

# Eject button on Mac Keyboard is not working. Im not able to eject internal CD/DVD super drive unless i right click on inserted disk or from C drive. This isn't the end of the world.

Update

I have Windows 7 64BIT updated with current drivers runs great except not being able to use Bootcamp Drivers from OSX install DVD. I have 7.4 overall rating out of 7.9.

Has anyobne been able to install BootCamp Drivers 64 BIT for windows 7 on Master Boot Record formatted drive? if so how did you do it?

Update

I just got windows 7 64 bit to boot using NewerTech MAXPower eSATA 6G PCIe 2.0 Controller Card on GUID DRIVE.

It's only suppose to work this way:

"Supports booting in Windows (Vista & Window 7) with AHCI mode enabled in the BIOS. Does NOT support booting on any Macintosh platform."

My previous post when booting I use Master Boot Record.

Making system image & restore disk now.Then I'm going to try to get BootCamp Drivers to install on GUID. I took screen shoots and pictures with my phone. I'll start new thread with detail directions if this works with drivers.

Solved!!!!

Thanks, Bootcamp Drivers install & working!!!! WIll post directions on new thread shortly.

check out URL to see how i was able to solve the problem.

https://forums.macrumors.com/threads/1023326/