Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

jason.siegel

macrumors 6502
Original poster
Jun 15, 2011
448
48
Can I plug my Air into an extension cord into a surge protector? I moved to a new apartment and need an extension cord to get to the wall outlet (I seem to have lost my Apple extension), but I don't have additional peripherals in the area and so I was thinking of getting something similar to this: http://www.amazon.com/Belkin-3-Outl...d=1404684388&sr=1-11&keywords=surge+protector

Thanks.

(Also, do I need 1 AMP or 2.1 AMPs?)
 
Last edited:
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Can I plug my Air into an extension cord into a surge protector? I moved to a new apartment and need an extension cord to get to the wall outlet (I seem to have lost my Apple extension), but I don't have additional peripherals in the area and so I was thinking of getting something similar to this: http://www.amazon.com/Belkin-3-Outl...d=1404684388&sr=1-11&keywords=surge+protector

Thanks.

(Also, do I need 1 AMP or 2.1 AMPs?)

There will be no issues with that set up. Just note that you lose the grounding plug because you are using your MagSafe adapter's beak head which lacks the third grounding pin.
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Thanks.

1 AMP or 2.1?

The 1 or 2.1 amp option has no effect on the standard plugs on the surge protector but rather just the USB ports. If you plan to plug in a small device like an iPhone into the protector, then the 1 amp is fine (500 milliamp per port, same as a computer), but for larger devices like an iPad, the 2.1 amp capacity is necessary. The actual surge protector portion (standard outlets) is actually rated for up to 15 amps.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.