Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

flash777

macrumors newbie
Original poster
Aug 7, 2009
1
0
Hi,

I have upgraded to ML. I used to be able to Remote Desktop into my work machine using Cord without problems in SL. However, after the upgrade, I find that the work machine becomes inaccessible frequently. Internet sites work when I hit them with browser.

I try to ping the work machine and even pings don't go through. I see the following messages in Console. Has anyone seen this kind of behavior?


9/14/12 11:41:42.000 AM kernel[0]: AppleBCM5701::selectMedium - gigabit, full duplex, flow control required
9/14/12 11:41:42.000 AM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
9/14/12 11:41:42.171 AM configd[17]: network changed: v4(en0:16.1.1.90) DNS! Proxy SMB
9/14/12 11:41:42.178 AM configd[17]: network changed: v4(en0-:16.1.1.90) DNS- Proxy- SMB
9/14/12 11:41:45.000 AM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0c01,0200,c5e1,2800]
9/14/12 11:41:46.927 AM configd[17]: config_demux(): unknown message ID (20001) received
9/14/12 11:41:46.928 AM configd[17]: config_demux(): unknown message ID (20001) received
9/14/12 11:41:46.931 AM configd[17]: network changed: v4(en0+:16.1.1.90) DNS+ Proxy+ SMB
9/14/12 11:41:46.932 AM configd[17]: config_demux(): unknown message ID (20001) received
9/14/12 11:41:46.932 AM configd[17]: config_demux(): unknown message ID (20001) received


Thanks in advance for any help!
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.