a1181 revival question

boneskid1 · Dec 25, 2012, 06:29 PM

So i have a first gen macbook 1,1 and I am towards the end of my upgrade and revival so I figured I would ask one more question before finishing it up.

Would it be helpful to my system to redo the heatsink compound with article silver or something of the sort? Vs. Leaving the old on.

When I says helpful I am taking about heat and if it is going to stay any cooler

AlphaDogg · Dec 25, 2012, 06:31 PM

Yes. A proper application of arctic silver 5 is far superior to the stock (sloppy, excess) paste.

I have a few threads on me replacing the stock paste with AS Ceramiqué on MacBook/Pros

boneskid1 · Dec 25, 2012, 10:25 PM

OK I will do a search and check those out

Dec 25, 2012, 06:29 PM	#1
boneskid1 macrumors member Join Date: Sep 2012	a1181 revival question So i have a first gen macbook 1,1 and I am towards the end of my upgrade and revival so I figured I would ask one more question before finishing it up. Would it be helpful to my system to redo the heatsink compound with article silver or something of the sort? Vs. Leaving the old on. When I says helpful I am taking about heat and if it is going to stay any cooler
	0

Dec 25, 2012, 06:31 PM	#2
AlphaDogg macrumors 68040 Join Date: May 2010 Location: Denver, CO	Yes. A proper application of arctic silver 5 is far superior to the stock (sloppy, excess) paste. I have a few threads on me replacing the stock paste with AS Ceramiqué on MacBook/Pros __________________ 15" 2.66GHz C2D uMBP \| 13" 2.4GHz i5 MBP 500GB \| '07 MacBook iPhone 5 32GB \| iPhone 3GS 8GB \| iPhone 8GB אני רוצה לעשות עליה לישראל
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Dec 25, 2012, 10:25 PM	#3
boneskid1 Thread Starter macrumors member Join Date: Sep 2012	OK I will do a search and check those out
	0