ATV 2 can't go in DFU mode,,

[jigsb007]

Hi,
Guys, I am trying to JB my atv2 (5.0) using seas0npass and this stupid atv doesn't go in dfu mode.
Please help....any tricks?

I downloaded pass from I clarified and trying to put atv in dfu mode by pressing those 2 buttons and looks like its not going in...

Please help

[rgarjr]

I just upgraded my ATV2 to 5.1 and installed the new XBMC Eden on mine.

Here's how to put into DFU (have the power cable plugged in and the usb cable plugged in):

On the remote control hold down the down button and Menu button for like 7 seconds and let go, this will reboot the ATV

Immediately hold down the Menu and Play for like 7 seconds and it will go into DFU.

[jigsb007]

Originally Posted by rgarjr

I just upgraded my ATV2 to 5.1 and installed the new XBMC Eden on mine.

Here's how to put into DFU (have the power cable plugged in and the usb cable plugged in):

On the remote control hold down the down button and Menu button for like 7 seconds and let go, this will reboot the ATV

Immediately hold down the Menu and Play for like 7 seconds and it will go into DFU.

I have also just upgraded from 4.4.4 and now it's showing 5.0 (not 5.1) why?
Also I am doing as explained everywhere .
Connect USB and power cable, and then press and hold those 2 buttons for 7 secs. And release it.. That's it....
But not working out...
Whats wrong? Am I doing?

[xxbrankxx]

Are you using an aluminum AppleTV remote? I know it doesn't work with the old white ones.

[maturola]

Originally Posted by jigsb007

I have also just upgraded from 4.4.4 and now it's showing 5.0 (not 5.1) why?
Also I am doing as explained everywhere .
Connect USB and power cable, and then press and hold those 2 buttons for 7 secs. And release it.. That's it....
But not working out...
Whats wrong? Am I doing?

That's what you are doing wrong, do not connect the power cable.

(it will show 5.0, ATV firmware numbering is always behind but in fact is the most current version)

[jazzsingh]

I spent hours with this issue and have to admit : it is the CABLE that is the problem.

After trying 5 cables - the 6th one that just came with my Sony 3d glasses worked. dont ask why - all cables work as USB charging other things but not Apple TV.

here is a quick advice: if you connect apple tv to USB and it dosent show up in Itunes - you have a issue. You need to find a cable that makes it show

[mmomega]

If you connect the USB cable and it doesn't show in iTunes then you'll need to connect the power cable.

If it does show, you don't need the power cable.


Basically connect USB first, if aTV doesn't show up, then plug in the power cable. It should show up like it should then.
I had a hell of a time with DFU mode on my aTV2 when they first came out trying to figure that out.
Just depends on what kind of micro USB you have.

[Bach2011]

I could get it into DFU mode every time. Here are my tricks:

- Connect both USB and power cables.
- Hold on Menu and Play buttons for 7 secs once it's getting into DFU, pull the power cable off. If I leave the power cable connect, it will go to Apple factory restore instead.