Go Back   MacRumors Forums > iPhone, iPod and iPad > iPhone

Reply
 
Thread Tools Search this Thread Display Modes
Old Dec 30, 2012, 11:50 PM   #26
KillerStephen
macrumors newbie
 
Join Date: Dec 2012
Still wondering...
KillerStephen is offline   0 Reply With Quote
Old Dec 31, 2012, 09:47 AM   #27
takeshi74
macrumors 601
 
Join Date: Feb 2011
There are a couple of potential issues mentioned in this thread. One is that 3.5 mm jacks aren't very sturdy and can easily end up with crackling, etc. I suggest getting line out from the dock/lightning connector instead. Other issue is interference. If you're using the 850 MHz band there's probably not much you can do about the interference.
takeshi74 is offline   0 Reply With Quote
Old Dec 31, 2012, 10:11 AM   #28
Hustler
macrumors regular
 
Join Date: May 2010
I have ip5 AT&T and when I have LTE on, I also get a lot of static when I use the aux jack. I have several different aux cables but I don't think any are griffin. Also happens with apples new ear pods/ buds.
When I turn LTE off it is 99.9% gone. The type of crackling changes to something that is very brief compared to the LTE crackle, more of a pop sound now and it's less annoying.
What is annoying however is that anytime I want to use the aux Port I have to switch off LTE.
I'm just waiting to make a apple store appointment because everything else on the phone is so perfect compared to all the other 'horror stories' that are posted here.
Brad
Hustler is offline   0 Reply With Quote
Old Dec 31, 2012, 11:05 AM   #29
Rocko1
Banned
 
Join Date: Nov 2011
It's interference being transmitted to the headphones or aux cable. Cable is not ht issue, it's internal and a design flaw. Exchanging phone won't help.
Rocko1 is offline   1 Reply With Quote
Old Jan 1, 2013, 11:41 AM   #30
Hustler
macrumors regular
 
Join Date: May 2010
Yea I know but I thought there is a chance they have upgrades the grounds inside or revised some shielding to fix it.
Hustler is offline   0 Reply With Quote
Old Jan 1, 2013, 12:06 PM   #31
Rocko1
Banned
 
Join Date: Nov 2011
Quote:
Originally Posted by Hustler View Post
Yea I know but I thought there is a chance they have upgrades the grounds inside or revised some shielding to fix it.
No, not enough people have sent Apple feedback for them to address this issue.

http://www.apple.com/feedback/iphone.html
Rocko1 is offline   0 Reply With Quote
Old Jan 1, 2013, 10:29 PM   #32
Hustler
macrumors regular
 
Join Date: May 2010
Quote:
Originally Posted by Rocko1 View Post
No, not enough people have sent Apple feedback for them to address this issue.

http://www.apple.com/feedback/iphone.html
Just did so, thank you very much for the direct link
Hustler is offline   0 Reply With Quote
Old Jan 17, 2013, 08:04 PM   #33
Hustler
macrumors regular
 
Join Date: May 2010
My first iPhone 5 as I previously stated had this issue since the day I got it in October. I had my iPhone replaced over the weekend with a new ip5 (for lodged dust under camera lens affecting the pictures with a large black blob) and that phone had the same problem as well.
The 2nd phone had the same static issue. I was like whatever, I can take pictures now so I was happy. However I soon learned when I got home this unit had 1/2 the wifi range of my prior phone. Upgraded to 6.0.2, same issue. So back she went into the genius group.
Replaced again with a new unit. This time I brought up the issues that I'm having with LTE static on both phones. He said if it happens on this third phone, restore as new iPhone and just re download all the apps I want one by one. Fair enough, worth a shot. Did so and on my way home this phone also had LTE static when the 3.5 jack was in use. I turned off LTE, immediately gone and didn't return the rest of the day.
This third phone has since been restored on a iCloud back up so back to normal with apps and data and such.
But still, the issue seems to be pretty consistent here. Could it be a local LTE thing? The apple employee said it was especially strange because the frequency LTE operates on is supposed to be above other appliances and have no interference.

How may people (who are still reading) have LTE and use the 3.5 jack for 1/2 hour at a time or more and notice NO interference noises? It's not consistent, sometimes it happens every other minute for about 4-5 seconds per occurrence. Other times it will only happen once or twice that I notice on my half hour drive to/fro work.
Hustler is offline   0 Reply With Quote
Old Feb 1, 2013, 11:29 PM   #34
Hustler
macrumors regular
 
Join Date: May 2010
Just an update, this still happens with fresh restore to 6.1.
Hustler is offline   0 Reply With Quote
Old Feb 3, 2013, 04:07 PM   #35
JimCali75
macrumors newbie
 
Join Date: Feb 2013
I'm having similar issues although mine doesn't seem to be LTE related. I get "crackling" and cutting out when listening to iTunes through the aux jack. It's really only noticeable when the iPhone 5 volume is near or all the way up. Its doesn't matter that I have the car or home stereo volume turned down. If the phone is maxed out it's pretty bad. Now I can compensate by turning the phone volume down and the receiving end up and it works fine. Still, it bothers me that this is even an issue. Moving/Spinning the cord in the jack seems to have very little effect.
JimCali75 is offline   0 Reply With Quote
Old Aug 4, 2013, 03:53 AM   #36
bugme
macrumors newbie
 
Join Date: Aug 2013
OKAY GUYS, here's what's going on.

Your car/stereo/whatever has a "ground" (in electrical terms), and when your phone is charging, the charger, or your phone's battery, or whatever, also has a "ground". Usually, ground is supposed to be the same, but in truth, it isn't always, and that causes a ground loop (see wikipedia if you care) -- what this means is that if you have your phone output to the car, then there are two electrical "grounds" which are supposed to be the same (and if it was the same voltage, it'd be silent and not cause buzz). But instead, when it's plugged into the car, there is a ground loop, which then makes electricity flow, which makes the static buzz. A ground loop isolator will solve this and remove the buzz, so I'd really recommend that.

YOUR PHONE IS NOT DEFECTIVE, this buzz is totally normal with GSM/EDGE/LTE, but shouldn't happen with 3G/HSPA/CMDA because of the technology. The cell radio turns on and off at ~800Hz, which is audible. It is not because of the cell phone frequency (which is 700-1900 MHz, which is wayyyyy too high frequency to hear). A shielded cable won't fix the issue and there's nothing wrong with your car, or the phone, or anything else.

TL;DR
In short, get a ground loop isolator, or the kensington noise reducing cable like this on amazon. It'll remove the buzz, but might slightly reduce the quality of your sound.
bugme is offline   0 Reply With Quote
Old Aug 4, 2013, 04:57 AM   #37
iHelios
macrumors member
 
Join Date: Jun 2012
Quote:
Originally Posted by lexpression View Post
Same problem when charging in car and connected to Cars aux Jack. Don't even have to have anything playing. This is a major problem. I must assume that I have to choose to listen to what I want or charge, but not both. HUGE problem.
Your problem is different than the OP

Try this: http://www.amazon.com/gp/aw/d/B001EAQTRI

This worked perfectly for me when I play music and charge my phone in the car simultaneously.
iHelios is offline   0 Reply With Quote
Old Nov 25, 2013, 07:57 AM   #38
JPatrick421
macrumors newbie
 
Join Date: Dec 2003
Location: Iowa
Send a message via AIM to JPatrick421
iPhone 5C 16GB Interference Problem - SOLUTION

I have noticed that my iPhone 5C causes interference on my Toshiba DK280 at work anytime I receive an email, text, surf the web... anytime my phone is accessing the LTE network, the Toshiba phone's speaker feeds back. This also happens at home when the phone is plugged into external speakers.

Solution:Go into settings, cellular, turn off LTE and the feedback problem goes away.
JPatrick421 is offline   0 Reply With Quote
Old Nov 25, 2013, 05:52 PM   #39
Mr. Buzzcut
macrumors regular
 
Join Date: Jul 2011
Location: Ohio
Old thread but still relevant. So many different issues too!

I have a noisy headphone jack on my new 5s. I'm going to see if it gets better with use and take it in if it does not. I usually do what I can to prevent the issue such as wiping the plug before inserting it. Dirt and oils usually cause the issue.

The "issue" with the cell radio interfering with poorly shielded electronics is not new. In fact it used to be a lot worse when phones had more powerful radios. This is not a defect in the phone but instead with the adjacent device.
Mr. Buzzcut is offline   0 Reply With Quote
Old Nov 25, 2013, 07:33 PM   #40
RustyIron
macrumors newbie
 
Join Date: Nov 2009
Made the problem go away

I experience noise periodically when my 5S is plugged into the auxiliary input in my truck. The solution is to turn off LTE in the cellular settings.

Despite being inconvenient, the problem does go away. Siri can't turn off LTE but she can "go to cellular settings" to save you a few taps.
RustyIron is offline   0 Reply With Quote
Old Jan 12, 2014, 10:59 AM   #41
rich2741
macrumors newbie
 
Join Date: Jan 2014
Exclamation Problem solved

I did not read all the responses, so hopefully someone else did not already reply with the answer/explanation.

Put you iPhone 5 in Airplane Mode when using the audio jack on the bottom left-hand side (TRRS [Tip,Ring,Ring,Sleeve] 3.5 / 3.5mm 4-pole / 1/8" 4-pole [actually fraction is 27559/200000" which would be 1/7.2571573714576 of an inch, hence the plug fits into the jack and works being that it is only 3.125% smaller in girth]).

In Airplane Mode the RF TX energy of the cellphone (the cell phone system intermittently polls the phone [and it responds back, hence RF energy] regardless if you are actually using the phone or not to update the traffic load across the cell system most efficiently) will be terminated. In responding to the system poll, your phone will use whatever output level it deems necessary to make the data connection in response; sometimes that is high, sometimes low. Ergo, sometimes you will get RF energy bleed into audio trace, and sometimes not (although a great product, it is not a $10,000 laboratory instrument).

When done using the jack, turn the Airplane Mode off so you can resume taking phone calls or allow other cell phone system services (like location) to resume.

If you use your phone in a fairly low use cell site, this may not even be necessary (polling is algorithm driven based on previous cell site traffic parameters).

If your problem still exists (which it shouldn't), then there is a hardware issue (bad cable or jack/plug).

Enjoy.
rich2741 is offline   0 Reply With Quote
Old Jan 28, 2014, 12:15 AM   #42
RandySea
macrumors newbie
 
Join Date: Feb 2013
I had an iPhone 4 that I used in my Subaru Outback 2001 to listen to recorded books. I connected via a cable to the Aux port on the my car stereo. It worked fine.

I got an iPhone 5s two weeks ago. Same car, same cable. At first, no problem. But starting yesterday, I get very noisy static/crashes. It is louder than the audio itself but erratic. I may get 30 quiet seconds, or only 5. It happens even with the ignition key in accessory mode, i.e., motor not running. Flexing & turning the cable doesn't change the static.

Even if I were willing to do long trips listening to books but having no cell reception, it wouldn't help. Airplane mode is just as static-y. I have no data plan by the way. Just AT&T Gophone. So data is turned off.

As I reread this post, it occurred to me that I should try the iPhone 4 now to see if it is still quiet. I'll do that tomorrow.
RandySea is offline   0 Reply With Quote

Reply
MacRumors Forums > iPhone, iPod and iPad > iPhone

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
Best bluetooth receiver for car audio/aux input? spinedoc77 iPhone Accessories 38 Oct 4, 2014 10:38 PM
Listen to iPod through my 3.5 aux jack in car thedwolfe iPod touch Accessories 6 Jul 25, 2013 06:30 AM
Audio from iPhone 5 Headphone jack distorting dgsimmonsmoony iPhone 4 Apr 15, 2013 10:33 AM
How to use the audio jack on my 2012 MBP as audio/mic input? blaake MacBook Pro 4 Feb 9, 2013 04:16 PM
iPod Dock Audio Aux Cable ipodlover77 Community Discussion 2 Jul 22, 2012 11:48 PM

Forum Jump

All times are GMT -5. The time now is 04:29 PM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC