Go Back   MacRumors Forums > iPhone, iPod and iPad > iPhone

Reply
 
Thread Tools Search this Thread Display Modes
Old Feb 10, 2013, 09:04 PM   #1
Macdude2010
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
Could the black aluminum dent/chip and still be anodized?

Hello all!
So today I was cleaning a replacement phone that I got about a week ago from the Genius Bar, and I noticed a small dent/chip on the side (not on the chamfer, on the actual side and not more then a mm in size, probably less) however, it is still anodized over, I looked at my case (speck candyshell) and I saw something that is around the same size and in around the same place, but I think it is just a defect in the rubber. My question is, could the case have caused this, or was it out of the box like this but I didn't notice? I've only had it for a week.

UPDATE: Better pictures from my DSLR
Attached Thumbnails
Click image for larger version

Name:	DSC_0569.jpg
Views:	119
Size:	286.5 KB
ID:	396408   Click image for larger version

Name:	Screen Shot 2013-02-12 at 2.39.08 PM.png
Views:	54
Size:	618.2 KB
ID:	396409  

Last edited by Macdude2010; Feb 12, 2013 at 02:43 PM.
Macdude2010 is offline   0 Reply With Quote
Old Feb 10, 2013, 09:35 PM   #2
Chris092881
macrumors 6502
 
Join Date: Dec 2012
I have a Speck Candyshell on my i5 too. I doubt that rubber liner could cause such an indent in aluminum.
Chris092881 is offline   0 Reply With Quote
Old Feb 10, 2013, 09:42 PM   #3
Macdude2010
Thread Starter
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
Quote:
Originally Posted by Chris092881 View Post
I have a Speck Candyshell on my i5 too. I doubt that rubber liner could cause such an indent in aluminum.
But if something I didn't notice got inside and dented it, would the anodizing still be there? Or would it have taken it off, pretty much my question is could it get dented and still have the anodizing on it?
__________________
I live life on the chamfered edge.
thinkjacob.com
Macdude2010 is offline   0 Reply With Quote
Old Feb 10, 2013, 09:44 PM   #4
Chris092881
macrumors 6502
 
Join Date: Dec 2012
Sure, it could remain anodized. If the object was, say, round and without rough edges that would scratch the anodizing off. A dent was more than likely there at the time you received the device. That's just my opinion though.
Chris092881 is offline   0 Reply With Quote
Old Feb 10, 2013, 09:52 PM   #5
BeeJee
macrumors 6502
 
Join Date: Nov 2011
Location: Long Island/North Jersey
Quote:
Originally Posted by Macdude2010 View Post
But if something I didn't notice got inside and dented it, would the anodizing still be there? Or would it have taken it off, pretty much my question is could it get dented and still have the anodizing on it?
The anodizing process is pretty much a surface dye. It isn't affected by the metal being dented or anything like paint may be. Anodization usually only comes off because of surface abrasion. That's why it comes off so easily on corners. It could have happened after you got it but like the poster above me said, with all these iPhones being pre damaged it was probably already there
BeeJee is offline   0 Reply With Quote
Old Feb 10, 2013, 09:54 PM   #6
Macdude2010
Thread Starter
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
Quote:
Originally Posted by Chris092881 View Post
Sure, it could remain anodized. If the object was, say, round and without rough edges that would scratch the anodizing off. A dent was more than likely there at the time you received the device. That's just my opinion though.
Thank you, hopefully because its only a week old, it came like this.

----------

Quote:
Originally Posted by BeeJee View Post
The anodizing process is pretty much a surface dye. It isn't affected by the metal being dented or anything like paint may be. Anodization usually only comes off because of surface abrasion. That's why it comes off so easily on corners. It could have happened after you got it but like the poster above me said, with all these iPhones being pre damaged it was probably already there
So, are you trying to say that this could have happened in the last week?
Edit: didn't see your last part of the post
__________________
I live life on the chamfered edge.
thinkjacob.com
Macdude2010 is offline   0 Reply With Quote
Old Feb 10, 2013, 09:56 PM   #7
Chris092881
macrumors 6502
 
Join Date: Dec 2012
He's right. The corners are susceptible to the most wear and tear for the obvious reasons. As far as the surface dye thing goes, do you think that explains all these "waterstain" marks people have been talking about?
Chris092881 is offline   0 Reply With Quote
Old Feb 10, 2013, 10:09 PM   #8
Macdude2010
Thread Starter
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
Quote:
Originally Posted by Chris092881 View Post
He's right. The corners are susceptible to the most wear and tear for the obvious reasons. As far as the surface dye thing goes, do you think that explains all these "waterstain" marks people have been talking about?
However, this is on the side, about 3/4 of the way up, not the chamfer or the metal next to it
__________________
I live life on the chamfered edge.
thinkjacob.com
Macdude2010 is offline   0 Reply With Quote
Old Feb 11, 2013, 10:16 AM   #9
Macdude2010
Thread Starter
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
I'm going to get a picture up here today, but one thing though, this is on the anodized side part, its not on the corner of the chamfer or the chamfer.
__________________
I live life on the chamfered edge.
thinkjacob.com
Macdude2010 is offline   0 Reply With Quote
Old Feb 11, 2013, 11:05 AM   #10
Macdude2010
Thread Starter
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
Here is a quick pic off my other iphone, I'll try to get one with my DSLR later
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	56
Size:	89.4 KB
ID:	396110  
Macdude2010 is offline   0 Reply With Quote
Old Feb 11, 2013, 01:37 PM   #11
aPple nErd
macrumors 68020
 
aPple nErd's Avatar
 
Join Date: Feb 2012
Location: Jailbreaks/IOS Hacks
Quote:
Originally Posted by Macdude2010 View Post
Hello all!
So today I was cleaning a replacement phone that I got about a week ago from the Genius Bar, and I noticed a small dent/chip on the side (not on the chamfer, on the actual side and not more then a mm in size, probably less) however, it is still anodized over, I looked at my case (speck candyshell) and I saw something that is around the same size and in around the same place, but I think it is just a defect in the rubber. My question is, could the case have caused this, or was it out of the box like this but I didn't notice? I've only had it for a week.
Seriously?! Like for REAL?!?!
__________________
iPhone 6 space grey, iPhone 5 White/Silver, iPod Tough 5 Blue, iPad 3 White, iPod Touch 4 White -- All Jailbroken
iMac Mid 2011 21.5"
aPple nErd is offline   0 Reply With Quote
Old Feb 11, 2013, 01:43 PM   #12
Macdude2010
Thread Starter
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
Quote:
Originally Posted by aPple nErd View Post
Seriously?! Like for REAL?!?!
I just want to know if the case caused it or it came out of the box like this.
__________________
I live life on the chamfered edge.
thinkjacob.com
Macdude2010 is offline   0 Reply With Quote
Old Feb 12, 2013, 02:45 PM   #13
Macdude2010
Thread Starter
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
UPDATE: much better pictures
Attached Thumbnails
Click image for larger version

Name:	DSC_0569.jpg
Views:	27
Size:	286.5 KB
ID:	396410   Click image for larger version

Name:	Screen Shot 2013-02-12 at 2.39.08 PM.png
Views:	24
Size:	618.2 KB
ID:	396411  
__________________
I live life on the chamfered edge.
thinkjacob.com
Macdude2010 is offline   0 Reply With Quote
Old Feb 12, 2013, 03:25 PM   #14
mikeydeezy
macrumors 6502a
 
Join Date: Jun 2010
Location: MN, USA
Interesting...so it seems like there might be extra material that was on the phone at the time of anodization.

Is that what your question was? If it would be possible for something to get anodized w/ the rest of the phone during manufacture. Seems like you got the answer in your hand.
__________________
Ordered: T-Mobile iPhone 6 Plus Gold 128GB
Date: 11/14/2014 @ 4PM
Shipped on: 11/17/2014
mikeydeezy is offline   0 Reply With Quote
Old Feb 12, 2013, 03:30 PM   #15
Macdude2010
Thread Starter
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
Quote:
Originally Posted by mikeydeezy View Post
Interesting...so it seems like there might be extra material that was on the phone at the time of anodization.

Is that what your question was? If it would be possible for something to get anodized w/ the rest of the phone during manufacture. Seems like you got the answer in your hand.
no, this is an actual indent on the phone, but its anodized over, i wanted to know if the case caused this, or it came out of the box like this a little more then a week ago and i didnt notice till now
__________________
I live life on the chamfered edge.
thinkjacob.com
Macdude2010 is offline   0 Reply With Quote
Old Feb 12, 2013, 03:40 PM   #16
barkomatic
macrumors 68040
 
Join Date: Aug 2008
Location: Manhattan
Grit of some kind eventually gets into all cases at some point and when its caught between the phone and the case and there is friction--it will create some kind of mark on the phone and often the case as well.

Hard shell cases seem to be the worst to have with grit and very soft rubbery cases the best--but they all get it. A friend of mine put his brand new pristine iPhone in a case the day he bought and then removed it 9 months later for the first time. The iPhone had numerous scratches all over it--it was really bad.

I've got a semi rigid case and just take if off about once a week and wash out the inside. So far so good--but I'll get a mark on there eventually.
barkomatic is offline   0 Reply With Quote
Old Feb 12, 2013, 03:46 PM   #17
Rocko1
Banned
 
Join Date: Nov 2011
It was done before it was coated.
Rocko1 is offline   0 Reply With Quote
Old Feb 12, 2013, 04:05 PM   #18
mikeydeezy
macrumors 6502a
 
Join Date: Jun 2010
Location: MN, USA
Quote:
Originally Posted by Rocko1 View Post
It was done before it was coated.
This.

There's no way this could be a post-manufacture dent that had the courtesy of anodizing itself.
__________________
Ordered: T-Mobile iPhone 6 Plus Gold 128GB
Date: 11/14/2014 @ 4PM
Shipped on: 11/17/2014
mikeydeezy is offline   0 Reply With Quote
Old Feb 12, 2013, 05:00 PM   #19
Bahroo
macrumors 68000
 
Join Date: Jul 2012
Quote:
Originally Posted by barkomatic View Post
Grit of some kind eventually gets into all cases at some point and when its caught between the phone and the case and there is friction--it will create some kind of mark on the phone and often the case as well.

Hard shell cases seem to be the worst to have with grit and very soft rubbery cases the best--but they all get it. A friend of mine put his brand new pristine iPhone in a case the day he bought and then removed it 9 months later for the first time. The iPhone had numerous scratches all over it--it was really bad.

I've got a semi rigid case and just take if off about once a week and wash out the inside. So far so good--but I'll get a mark on there eventually.
yeah that is obvious, you have to clean your case every so often, putting it in and out your pocket and placing it on different surfaces etc allows sand and grit to get in the case and that causes friction and scratches your phone, i clean my case on my iPhone 5 every so often and the coating on the phone has remained flawless so far

----------

Quote:
Originally Posted by Macdude2010 View Post
no, this is an actual indent on the phone, but its anodized over, i wanted to know if the case caused this, or it came out of the box like this a little more then a week ago and i didnt notice till now
youll never know, do you recall dropping your iPhone 5 ever? have you dropped your iphone 5 ? it could of gotten a tiny dent from when you dropped it IF you did drop it sometime...but that probably came from the factory, in that case anyway that looks extremely minute imo
Bahroo is offline   0 Reply With Quote
Old Feb 12, 2013, 05:17 PM   #20
Myiphone7
Banned
 
Join Date: Nov 2010
Dude honestly, it's SO small even your dsr can't pick it up. I can't see it. Don't worry about it man.
Myiphone7 is offline   0 Reply With Quote
Old Feb 12, 2013, 05:37 PM   #21
Macdude2010
Thread Starter
macrumors 6502a
 
Macdude2010's Avatar
 
Join Date: Mar 2010
Location: The Apple Store
Quote:
Originally Posted by Bahroo View Post
yeah that is obvious, you have to clean your case every so often, putting it in and out your pocket and placing it on different surfaces etc allows sand and grit to get in the case and that causes friction and scratches your phone, i clean my case on my iPhone 5 every so often and the coating on the phone has remained flawless so far

----------



youll never know, do you recall dropping your iPhone 5 ever? have you dropped your iphone 5 ? it could of gotten a tiny dent from when you dropped it IF you did drop it sometime...but that probably came from the factory, in that case anyway that looks extremely minute imo
Never dropped, only a little more then a week old
__________________
I live life on the chamfered edge.
thinkjacob.com
Macdude2010 is offline   0 Reply With Quote
Old Feb 12, 2013, 05:45 PM   #22
RichardC300
macrumors 6502a
 
Join Date: Sep 2012
Location: Chapel Hill, NC
Quote:
Originally Posted by Myiphone7 View Post
Dude honestly, it's SO small even your dsr can't pick it up. I can't see it. Don't worry about it man.
I see each problem area in every picture he has posted. Maybe your visual is failing.

This dent was most likely there before the anodization process.

----------

Also, I think the blemish on the rubber was just a coincidence. It's not even that close to where it is on the phone.
RichardC300 is offline   0 Reply With Quote

Reply
MacRumors Forums > iPhone, iPod and iPad > iPhone

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
Black anodized aluminum in the future? i'm.huMAC MacBook Pro 17 Feb 28, 2013 11:57 AM
Do you still want an ALL Black Anodized Aluminum iPad option? appswipe iPad 24 Oct 2, 2012 12:41 AM
How about black anodized aluminum iPads? Yr Blues iPad 2 Sep 13, 2012 11:01 AM
Black Anodized Aluminum Macs? moogs MacBook Pro 10 Sep 13, 2012 10:54 AM
How about black anodized aluminum MacBooks? Yr Blues MacBook 3 Sep 12, 2012 09:08 PM

Forum Jump

All times are GMT -5. The time now is 12:05 AM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC