New iPad 5 Case Consistent with Rumored Mini-Style Redesign

MacRumors · Feb 22, 2013, 08:12 PM

Apple accessory manufacturer MiniSuit has already created a case for the upcoming fifth-generation iPad, based on data and specifications received from what the site claims is a reliable source. The site sent MacRumors photos of the case this evening.

Case manufacturers often obtain case specs ahead of product releases to get a jump on manufacturing. Creating a case based on measurements can be a gamble, but an early case release can be financially beneficial.

The iPad 5 case is slimmer than the fourth-generation iPad case, which supports rumors that the next iPad will share design similarities with the iPad mini, most notably featuring smaller side bezels.

The back of the case depicts an extra hole, which is for the microphone. The current fourth-generation iPad's microphone is located at the top of the device, but Apple has relocated the microphone to the back of the iPad 5, as noted in leaked photos of the rear shell of the device.

In addition to slimmer bezels and a smaller size, the iPad 5 is said to be significantly thinner than the iPad 4, featuring the chamfered edges of the iPad mini, which is apparent in the less angled design of the iPad 5 case.*We recently posted a mockup of what the fifth-generation iPad might look like, based on the current rumors and the leaked rear shell.

An iPad 5 with a reduced size would likely necessitate a redesign of the interior of the tablet as well, incorporating smaller chip components and a thinner display panel.

Several different release dates for the fifth-generation iPad have been suggested, ranging from March to mid-year to October, with most rumors settling on a fall release. According to MiniSuit, Apple's iPad 5 will be released in June.

Additional photos:

Article Link: New iPad 5 Case Consistent with Rumored Mini-Style Redesign

komodrone · Feb 22, 2013, 08:13 PM

nah these are for the iPad 6, which comes out 3 months after ipad 5

appleguy123 · Feb 22, 2013, 08:16 PM

I will miss the beveled edges. It made the tablet super easy to pick up from any angle when on a table.

Krud92 · Feb 22, 2013, 08:17 PM

If they have the headphone jack on the back of the iPad, do you think there will be new headphones? Most headphone jacks are longer than the iPad is wide

Yojimbo007 · Feb 22, 2013, 08:20 PM

Whats the point of the mic being on the back of the pad... Makes no sense..

appleguy123 · Feb 22, 2013, 08:21 PM

Quote:

Originally Posted by Krud92

If they have the headphone jack on the back of the iPad, do you think there will be new headphones? Most headphone jacks are longer than the iPad is wide

The hole on the back is the microphone spot. The headphone jack is where it was on the old ipad.

Krud92 · Feb 22, 2013, 08:21 PM

Quote:

Originally Posted by Krud92

If they have the headphone jack on the back of the iPad, do you think there will be new headphones? Most headphone jacks are longer than the iPad is wide

I just realized that said microphone. Not headphone jack.

My bad haha

HobeSoundDarryl · Feb 22, 2013, 08:23 PM

Quote:

Originally Posted by Yojimbo007

Whats the point of the mic being on the back of the pad... Makes no sense..

Silent movies went out in the 1920's or so.

APlotdevice · Feb 22, 2013, 08:27 PM

Quote:

Originally Posted by HobeSoundDarryl

Silent movies went out in the 1920's or so.

Silent video chat has never existed to my knowledge.

SAIRUS · Feb 22, 2013, 08:27 PM

Well switching to this setup, I do wonder how much weight they will shed?

Also will the screen allow me to play my Fruit Ninja games without glitching?

Meh, it has my money probably already... ...unless the mini goes retina and can keep the weight at a good limit.

mac jones · Feb 22, 2013, 08:30 PM

I think I'll hold off pre-ordering one of these cases.

Nothing like building accessories based on rumors.

There's always a couple, and they are always off just a little.

iCaleb · Feb 22, 2013, 08:33 PM

I thought the watermark over the image said something else at first.

mac jones · Feb 22, 2013, 08:35 PM

Quote:

Originally Posted by iCaleb

I thought the watermark over the image said something else at first.

Like what?

AppleScruff1 · Feb 22, 2013, 08:35 PM

Quote:

Originally Posted by iCaleb

I thought the watermark over the image said something else at first.

You're right! On quick glance it does.

bushido · Feb 22, 2013, 08:36 PM

Quote:

Originally Posted by iCaleb

I thought the watermark over the image said something else at first.

hahaha i had to scroll back up and was like LOL! ur right

mac jones · Feb 22, 2013, 08:37 PM

Quote:

Originally Posted by AppleScruff1

You're right! On quick glance it does.

Shucks, I stared at it.

Oh we'll.

iGrip · Feb 22, 2013, 08:39 PM

Quote:

Originally Posted by MacRumors

In addition to slimmer bezels and a smaller size, the iPad 5 is said to be significantly thinner than the iPad 4, featuring the chamfered edges of the iPad mini

Why does any of that matter to someebody who is going to put it into a case anyways?

sammarshall · Feb 22, 2013, 08:40 PM

The iPad 4 has a Lightning connector. That case must be for the iPad 3.

scupking · Feb 22, 2013, 08:46 PM

I'm thinking iPad 5 next month and mini with retina in fall.

APlotdevice · Feb 22, 2013, 08:46 PM

Quote:

Originally Posted by sammarshall

The iPad 4 has a Lightning connector. That case must be for the iPad 3.

iPad 2, 3, and 4 can all fit mostly the same cases. Producing a case with a smaller cut out so that it only works with the iPad 4 doesn't make much business sense.

AppleScruff1 · Feb 22, 2013, 08:47 PM

Quote:

Originally Posted by sammarshall

The iPad 4 has a Lightning connector. That case must be for the iPad 3.

Maybe they're changing the connector again.

mac jones · Feb 22, 2013, 08:53 PM

Quote:

Originally Posted by sammarshall

The iPad 4 has a Lightning connector. That case must be for the iPad 3.

Right.

Nevermind

kobyh15 · Feb 22, 2013, 08:56 PM

I'll probably have to upgrade my iPad 3 if the rumored dimensions are true. I'd love a thinner iPad with a smaller footprint.

sammarshall · Feb 22, 2013, 09:00 PM

Quote:

Originally Posted by APlotdevice

iPad 2, 3, and 4 can all fit mostly the same cases. Producing a case with a smaller cut out so that it only works with the iPad 4 doesn't make much business sense.

So, you agree that it's not an iPad 4 case? Super.

Lancer · Feb 22, 2013, 09:17 PM

Quote:

Originally Posted by Yojimbo007

Whats the point of the mic being on the back of the pad... Makes no sense..

When you're recording video of someone else you want to heard them

Like replacing my iPhone I've waited so long for an iPad a few more months won't kill me, can't wait to see what they release in June.

Feb 22, 2013, 08:12 PM	#1
MacRumors macrumors bot Join Date: Apr 2001	New iPad 5 Case Consistent with Rumored Mini-Style Redesign Apple accessory manufacturer MiniSuit has already created a case for the upcoming fifth-generation iPad, based on data and specifications received from what the site claims is a reliable source. The site sent MacRumors photos of the case this evening. Case manufacturers often obtain case specs ahead of product releases to get a jump on manufacturing. Creating a case based on measurements can be a gamble, but an early case release can be financially beneficial. The iPad 5 case is slimmer than the fourth-generation iPad case, which supports rumors that the next iPad will share design similarities with the iPad mini, most notably featuring smaller side bezels. The back of the case depicts an extra hole, which is for the microphone. The current fourth-generation iPad's microphone is located at the top of the device, but Apple has relocated the microphone to the back of the iPad 5, as noted in leaked photos of the rear shell of the device. In addition to slimmer bezels and a smaller size, the iPad 5 is said to be significantly thinner than the iPad 4, featuring the chamfered edges of the iPad mini, which is apparent in the less angled design of the iPad 5 case.*We recently posted a mockup of what the fifth-generation iPad might look like, based on the current rumors and the leaked rear shell. An iPad 5 with a reduced size would likely necessitate a redesign of the interior of the tablet as well, incorporating smaller chip components and a thinner display panel. Several different release dates for the fifth-generation iPad have been suggested, ranging from March to mid-year to October, with most rumors settling on a fall release. According to MiniSuit, Apple's iPad 5 will be released in June. Additional photos: Article Link: New iPad 5 Case Consistent with Rumored Mini-Style Redesign
	1

Feb 22, 2013, 08:13 PM	#2
komodrone macrumors 6502 Join Date: Apr 2011	nah these are for the iPad 6, which comes out 3 months after ipad 5
	24

Feb 22, 2013, 08:16 PM	#3
appleguy123 macrumors 603 Join Date: Apr 2009 Location: 15 minutes in the future	I will miss the beveled edges. It made the tablet super easy to pick up from any angle when on a table. __________________ [Steve Jobs was] brave enough to think differently, bold enough to believe he could change the world, and talented enough to do it. -Barack Obama
	8

Feb 22, 2013, 08:17 PM	#4
Krud92 macrumors newbie Join Date: Dec 2010	New headphones? If they have the headphone jack on the back of the iPad, do you think there will be new headphones? Most headphone jacks are longer than the iPad is wide
	0

Feb 22, 2013, 08:27 PM	#10
SAIRUS macrumors 6502 Join Date: Aug 2008	Well switching to this setup, I do wonder how much weight they will shed? Also will the screen allow me to play my Fruit Ninja games without glitching? Meh, it has my money probably already... ...unless the mini goes retina and can keep the weight at a good limit. __________________ You're ugly... ...only if you think you are. 15" Retina Macbook Pro, iPhone 5, Apple TV, iPad 3 (that's what I'm calling it ), iPad Mini
	0

Feb 22, 2013, 08:20 PM	#5
Yojimbo007 macrumors member Join Date: Jun 2012	Whats the point of the mic being on the back of the pad... Makes no sense..
	6

Feb 22, 2013, 08:30 PM	#11
mac jones macrumors 68040 Join Date: Apr 2006	I think I'll hold off pre-ordering one of these cases. Nothing like building accessories based on rumors. There's always a couple, and they are always off just a little.
	0

Feb 22, 2013, 08:33 PM	#12
iCaleb macrumors 6502 Join Date: Apr 2010 Location: USA	I thought the watermark over the image said something else at first.
	10

Feb 22, 2013, 08:40 PM	#18
sammarshall macrumors newbie Join Date: Feb 2013	The iPad 4 has a Lightning connector. That case must be for the iPad 3.
	1

Feb 22, 2013, 08:46 PM	#19
scupking macrumors regular Join Date: Dec 2010	I'm thinking iPad 5 next month and mini with retina in fall. __________________ 2010 Macbook Pro 13" iPad mini (black, 16GB wifi)
	2

Feb 22, 2013, 08:56 PM	#23
kobyh15 macrumors 6502a Join Date: Jan 2011	I'll probably have to upgrade my iPad 3 if the rumored dimensions are true. I'd love a thinner iPad with a smaller footprint.
	3

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode