Mid 2011 Thunderbolt port issue

Hi all,

Worked great until Friday. Turned it off and on and it would no longer work


I have the Thunderbolt display. The 2011 I7 Mini. The thunderbolt display and two external Thunderbolt HDD Lacie will not work on the mini. The thunderbolt display will work fine on a friends 2012 Mini.

I took my friends Monoprice monitor. I am using a Displayport to Thunderbolt adapter. That works fine on my Mini. I do not understand why one would work and not the other if it works fine on another machine. ugh

Fishrrman said:

Take your Mini to your friend's.

Does -your- Mini work with HIS display?

Click to expand...

His display was the Monoprice monitor which is Displayport to Thunderbolt adapter and that works fine on my mini in the Thunderbolt port. My thunderbolt display works fine on his Mini

I have tried the NVR and the SMC several times as well. I am glad I can use the mini until I get some ideas on what I want to do next such as buy something, etc

ATM I have the Monoprice monitor connected to the mini via Displayport to Thunderbolt adapter.

chrfr said:

While Thunderbolt and Displayport share the same port, they aren't the same.
Have you tried to get Thunderbolt to work from the recovery partition?
Have you tried an SMC and NVRAM reset?
https://support.apple.com/en-us/HT204063
https://support.apple.com/en-us/HT201295

Do you see anything reported under the Thunderbolt section of the System Information application? (About this Mac, then System Report.)

Click to expand...

Under system report
Vendor Name: Apple Inc.
Device Name: Mac mini
UID: 0x0001000C1D97FB20
Route String: 0
Firmware Version: 22.2
Domain UUID: E8858889XXX
Port:
Status: No device connected
Link Status: 0x101
Speed: Up to 10 Gb/s x2
Receptacle: 1
Port Micro Firmware Version: 2.1.3