Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

verter2k

macrumors newbie
Original poster
Jul 20, 2009
7
0
hi,
I've searched this and other forums and still with my problem, I'll appreciate help a lot.
What do I have -
1. D-LINK WIFI ROUTER + ADSL 2740U (802.11n mode enabled)
2. MBP WITH 10.4.11 and AirPort (802.11n mode enabled)
3. Windows 2003 Server SP2 with shares

4. I'm trying to copy large files (500-1000MB) from server to the mac os and the speed is about 50-100kb/s, so 1.3GB file is transferred over 3 hours. Is it ok? The windows station works faster (XP) but I like mac os x.

the protocol is IP only and router is DHCP server
change the distance from router to mac is making no difference

any any suggestions?
 

belvdr

macrumors 603
Aug 15, 2005
5,945
1,372
Did you try using a wired connection?

Even if you're 4 feet from the router, if you have interference, it will affect your throughput. Using a wired connection eliminates that possibility.
 

diamond.g

macrumors G4
Mar 20, 2007
11,068
2,421
OBX
thanks, have disabled it, but nothing changed

So the Win2k3 server is hardwired or are both on the wifi?

The only other thing I can think of is the changing of the file type as it is being transmitted. I have also seen people complain about Tigers Windows networking support, but I am not sure if that is the problem. If you plug both computers into the router (wired) do you still get the same transfer rates (basically isolate if it is a network problem or a server/mac problem).
 

belvdr

macrumors 603
Aug 15, 2005
5,945
1,372
but why WXP box works much better than?

There's no way to know for certain unless you start troubleshooting using my steps above. You have not stated what is wired or wireless, so we're just guessing.
 

verter2k

macrumors newbie
Original poster
Jul 20, 2009
7
0
The flow:

Internet-wired 100Mbit -W2K3 SERVER-wireless (802.11g)-DLINK ROUTER-wireless (802.11n) - MAC BOOK PRO

D-Link also has its own connection to another ISP via DSL (backup but active)
 

diamond.g

macrumors G4
Mar 20, 2007
11,068
2,421
OBX
The flow:

Internet-wired 100Mbit -W2K3 SERVER-wireless (802.11g)-DLINK ROUTER-wireless (802.11n) - MAC BOOK PRO

D-Link also has its own connection to another ISP via DSL (backup but active)

Is it any faster if you plug both the Mac and the Server into the router (wired...)?
 

verter2k

macrumors newbie
Original poster
Jul 20, 2009
7
0
TESTS

1) on win server disabled wifi and connect its ethernet to router

speed 1.3Mbit/s both up and down (500Mbytes file)

2) connected over direct wi-fi mac to server (no security (WEP) at all)

speed 500-700kbit/s up and down (1Gb file up and 200Mb file down)

3) original speeds are around 30-50-150 kbit/s
 

belvdr

macrumors 603
Aug 15, 2005
5,945
1,372
Sounds like your D-Link router is at fault then. Try running everything at G speeds.
 

diamond.g

macrumors G4
Mar 20, 2007
11,068
2,421
OBX
You could be getting enough collisions/interference that the router is forcing a slower speed to maintain the connection (connection isn't the word I wanted to use, but it will have to due for now).
 

verter2k

macrumors newbie
Original poster
Jul 20, 2009
7
0
I think I may disable WLAN encryption (as I maintain MAC address filter). What do you think?

Also, I have following modes on a router:
Mixed 802.11ng and 802.11b (running)
802.11g only
802.11b only
802.11n only
Mixed 802.11g and 802.11b

Channel: Auto
AP Isolation: off
Fragmentation: 2346
RTS Threshold: 2347
DTIM Interval: 1
beacon interval: 100
Preamble: long
Transmit power: 100%

WPA2-PSK - security

the server has DWL-550 (relatively old adapter which I could replace with, say, DWA-547
 

belvdr

macrumors 603
Aug 15, 2005
5,945
1,372
Try it. There's no harm in trying it and that's the only way you'll find the culprit. Honestly, I'd try what you mentioned and running everything on G to see what helps.
 

verter2k

macrumors newbie
Original poster
Jul 20, 2009
7
0
Have moved to 802.11g and turned off security at all. Speed - 0.5Mbps upstream so it is a bit better but anyway slow.
 

belvdr

macrumors 603
Aug 15, 2005
5,945
1,372
Here's the next step.

  1. Hardwire the server to the router, and leave the client on wireless.
  2. Test.
    • If slow go to step 3.
    • If fast, there is an issue with the server's wireless card/connection.
  3. Hardwire the client and leave the server on wireless.
  4. Test
    • If slow, replace the router.
    • If fast, there is an issue with the client's wireless card/connection.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.