|Apr 2, 2012, 02:31 PM||#1|
USB drawing too much power - help!
I recently tried to plug my printer into one of my macbook pro usb ports and I'm getting a message that reads that the USB is drawing too much power and the port will be deactivated. I'm very confused! I've used the printer before on the computer with no problem. I changed the usb cables out, I went and bought a self powered mutli usb hub.. that didnt work. HELP!
|Apr 10, 2012, 09:01 PM||#3|
A plain USB cable with nothing attached at the other end shouldn't consume any power at all. It's just wires. If there's a short circuit in the cable, then that's a serious problem, and will lead to the error message.
The most likely solution is to use a different cable. If that one fails, too, then maybe the problem is in the computer's USB connector. You'd have to take it in for service to know for sure. If you do that, you should also take the cables that are failing, because you might just have multiple defective cables.
|Apr 11, 2012, 09:30 AM||#4|
VERY IMPORTANT QUESTION:
Is the printer "USB powered", or, does it have it's own power source?
For reasons known only to Apple, many (not all, but most) Macs do not supply enough USB "bus power" to support some external USB devices. Typically, if you already have a USB device or two connected (example: keyboard and mouse) and attempt to plug in -another- device (that requires USB power), you may get an alert that the USB bus cannot supply power to the device (and has been "deactivated", as said the message you received).
What's happened is that you tried to connect a device (or devices) that exceeded the aggregate ability of the Apple USB bus to supply power to all of them.
If the printer you have -is- "USB powered", and -if- it has an external power supply block, try powering it up using the power block and then connecting to the Mac. That may help.
|May 27, 2012, 06:01 PM||#5|
My Late 2008 MacBook Pro with Lion, is giving me the same error message, when plugging in the iPhone USB cable only. I will check with other cables.
And now what is NeXT?
|Nov 22, 2012, 05:41 PM||#6|
Just had exactly this problem with a Blumax GPS device on my new MacBook Pro. Tried it on my MacPro. Same problem. Tried it with a powered hub. Same problem. Tried a different USB cable from the one supplied, worked perfectly. So the supplied USB cable has gone in the bin.
I reckon that all USB cables are (in theory) equal, but some are more equal than others.
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|USB drawing too much power?||qzxyu||iMac||5||Jun 5, 2013 09:58 AM|
|MBA error "USB device drawing too much power"||btr999||Mac Basics and Help||3||Mar 6, 2013 01:26 PM|
|"USB Drawing Too Much Power" Error Power Problem Late 2008 Unibody MB470LL/A||Auricular||MacBook Pro||7||Feb 10, 2013 02:07 AM|
|USB drawing too much power||iLoveMyApple||iPhone||1||Sep 27, 2012 11:21 PM|
|USB Drawing too much power?||briannag||iMac||18||Jun 23, 2012 01:12 PM|
All times are GMT -5. The time now is 01:51 AM.