|Dec 20, 2012, 12:10 AM||#1|
Creating installation floppy disks for OS 7.0.1 from OSX?
I'm on OSX Lion with a working Floppy USB unit and brand new 3 1/2 disks, trying to install OS 7.0.1 on a Macintosh Classic with a new drive (no current installed OS).
I ran the following command on terminal: dd if=~/OS7/os-6-1.img of=/dev/disk1 bs=84 skip=1
It completes succesfully, but then I encounter the following problems:
1) If I try to re-mount on Disk Utility, it returns an error message saying it cannot be mounted.
2) If I eject it after the terminal command, it says I have to initialize it, because it's not formatted (??)
3) If I start my Macintosh Classic with it, it ejects it and doesn't recognize it as an installation disk.
|Dec 20, 2012, 08:39 PM||#4|
If you get MacFuse from Tuxera and THEN install Fuse HFS, you should be able to mount them in OSX.
There are many reasons why your floppy disk may not boot. Your floppy drive may have dirty heads, or mechanically may not fully engage due to seized lubricant in the drive mechanism.
HOWEVER, what might be a problem here is that your disk images may not be DiskCopy4.2 images (usually a .image file) but rather a NDIF file (usually a .img file).
If the disk images are NDIF, they DON'T need the
at the end of your dd command.
Drop the file onto TextEdit, and check the first line. If it begins with:
Then the first 84 bytes have already been stripped and the
is NOT needed.
Check this thread for more detail:
iBook14" 1.42Ghz, G4 DigitalAudio 733Mhz, iMac Snow 700Mhz, iBook SE 466Mhz, PowerBook Pismo 500Mhz, G3 B&W, G4 MDD 1.25Ghz, iMac 233 1998, iMac G4 USB2 1.25Ghz, iMac C2D 2.16Ghz, MacMini G4 1.25Ghz
|Thread Tools||Search this Thread|
All times are GMT -5. The time now is 10:41 AM.