Memtest results

mpress03 · Nov 11, 2012, 11:15 AM

I recently installed 8 gb of ram (2x4gb) in my 2011 iMac running Mountain Lion. I ran Memtest in single user mode as recommended on many sites. I am a little confused by the following results:

Solid bits: setting 45 of 64firewire (OHCI) Lucent ID 5901 built-in: 52 bus resets in last 3 minutes
Ok

I got the same kind of results but with different numbers in block sequential, checkerboard, bit spread and bit flip. There is nothing plugged into my FireWire port, so I was wondering if this a RAM issue? It ends with OK so I don't know if it is a problem or just giving me information.

DisMyMac · Nov 11, 2012, 02:47 PM

You will probably get good answers in the Mac Pro forum. Not so much here.

Nov 11, 2012, 11:15 AM	#1
mpress03 macrumors newbie Join Date: Feb 2012	Memtest results I recently installed 8 gb of ram (2x4gb) in my 2011 iMac running Mountain Lion. I ran Memtest in single user mode as recommended on many sites. I am a little confused by the following results: Solid bits: setting 45 of 64firewire (OHCI) Lucent ID 5901 built-in: 52 bus resets in last 3 minutes Ok I got the same kind of results but with different numbers in block sequential, checkerboard, bit spread and bit flip. There is nothing plugged into my FireWire port, so I was wondering if this a RAM issue? It ends with OK so I don't know if it is a problem or just giving me information.
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Nov 11, 2012, 02:47 PM	#2
DisMyMac macrumors 6502a Join Date: Sep 2009	You will probably get good answers in the Mac Pro forum. Not so much here.
	0