|Sep 15, 2012, 01:33 PM||#51|
|Sep 27, 2012, 06:47 AM||#52|
Best way to set up an HL2270 DW regardless of platform
I do not generally use Mac products, however, I have installed well over 50 of these particular printers(great printer by the way!). The best way to go about this is.....
Reset the printer to factory defaults.
Turn off the Brother HL2270DW Printer
Make sure that the front cover is closed and the power cord is plugged in.
Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up, and then the Ready LED turns off.
Release Go. Make sure that all the LEDs turn off.
Press Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings. The machine will restart.
Next connect the printer to your router via an ethernet cable. This will prompt the printer to acquire an address on your local network.
Wait about 30-60 seconds, and hit the go button 3 times. You should get 3 pages printed out(make sure there is paper in the paper tray!)
The third page has the IP address printed on it. Open a web browser on a computer you have connected to the network, and enter the web address into the URL box on the browser, and it shoudl open a printer configuration page.
On this page you have a great deal of control, but basically you will want to navigate to the configuration page, and enter the admin username and password for the printer. admin : access
You can only have wireless or wired connection at any one time, so you can go to the wireless setup, and enter the appropriate connection protocols for your network( WPA, WEP etc and any passkeys you use).
Network configuration -> wireless(tab)
if you have WPA you will need to select infrastructure mode. Enter the appropriate passkeys if you have wireless security in your router.
When you click submit, your printer will seek out a new IP address and attempt to connect to the router wirelessly, also make sure you disconnect the ethernet cable at this time. If successful, it will print out a single sheet of paper telling you so.
to connect the printer up via its ethernet cable to your router(assuming you have extra ports for a hard line on your wireless) Once you do this wait about 1 minute.
|Dec 3, 2012, 11:44 PM||#53|
I'm feeling Stupid
I've read all the threads related to this but I guess I'm still too new with my mac to get it. Sorry if this is redundant.
I just bought a brother HL-2270DW and I've set it up to work our wireless network and confirmed it worked by printing from my iPad. My issue is I can't print from my MacBook through the wireless but if I plug it in with the USB cable it works great. What am I doing wrong? Or haven't done right?
Stupid Flight Medic in Portland
Don't ask me how I did it but now I have my MacBook talking to my printer. It's working. I love this website. You all are amazing for us newbies to Mac's. Thanks for being here and helping.
Still the Stupid Flight Medic in Portland
|Jan 21, 2013, 02:43 PM||#54|
Wireless Brother to MacBook Pro
Had my Brother HL-2270DW printer for almost 2 years. tried so many times to connect to my wifi trough toshiba laptop, worked once and never after.
lost my toshiba and now i have a new ipad2 and MacBook Pro i7, 17" that i love.
since last night i was trying to get the wifi printing work and i did everything was in manual, brother website etc, till today i found this forum.
i dont remember who gave this solution but it worked for me.
when you setup the printer via USB or Ethernet Cable you will see only one Brother added to your Mac... solution was to "+" and find the second copy of brother under "bonjour".. when you added that and choose as default printer everything goes well and is sunny and life is great again....
|Jan 21, 2013, 02:55 PM||#55|
Wifi print between Brother and iPad2
ok, now that i got my MacBook Pro work with my Brother HL-2270DW via my wifi, i was wondering how i found it on my iPad2...
Brother has an app"iPrint&Scan" for iphone/ipad that i downloaded and it works great with my iPad, but where do i see my other printers on my iPad? How do i add printer toiPad2?
here is the Brother app for iPhone/iPad...
thanks and good luck to everyone..
|May 6, 2013, 10:32 PM||#57|
|Jun 22, 2013, 03:45 PM||#58|
To connect a MacBook Air or MacBook Pro to a Brother HL2270DW printer wirelessly, here are the crucial steps (as earlier posters have found).
1) Forget the CD. Go to the Brother support page; welcome.solutions.brother.com and drill down until you reach the downloads page for the HL-2270 DW printer. Choose OSX (10.8) or whatever newer version they may eventually post. Scroll down to the "Wireless Setup Wizard for Macintosh". Download, unpack, and run it.
2) As directed connect your Mac to the printer with a USB cable. Continue through the Setup Wizard until it says to disconnect the cable.
3) Now go to your Mac's System Preferences/Print&Scan and open it. You should see a "Brother HL-2270DW series" printer installed and selected--BUT this is for the USB connection only! The Mac OS is treating the USB and WiFi versions as separate printers but giving them the same name in this window.
4) Go to the bottom of the printer window and click "+" to Add a Printer or Scanner. Under "Nearby Printers" you should see another "Brother HL-2270DW series" printer. This is the wireless one! Click on it to set it up.
5) Finally, still on the Print&Scan page, select each printer and under "Options & Supplies" rename this one, at least, Brother Wifi.
I have a MacBook Pro w/Retina Display running 10.8.4 and everything is now set up and printing wirelessly. Thanks everyone for working this out and hope this summary helps.
|Jul 11, 2013, 11:16 AM||#59|
I also have spent many an hour trying to configure my Brother DCP-J925DW printer to my network. When I ran the diagnostics it said it was on the network so it was very frustrating not to connect to it wirelessly and I've been using the USB connector to print. Thanks for spending time looking at this thread and providing an answer. I found the printer after I pressed + in print and scan.
|Jul 16, 2013, 10:34 PM||#60|
Just bought the Brother HL 2270DW
I clicked on the "+" under print & scan, it then asks to "download & install" and when I clicked on that it gave me this error message:
Can't install the software for the Brother HL-2270DW series because it is not currently available from the Software Update server.
But it can detect it just not working for some reason
UPDATE: Sorry I restarted my computer and tried the whole process again and now it worked WOOPY!!!
Last edited by moonlitorchids; Jul 16, 2013 at 10:56 PM.
|Jul 24, 2013, 07:32 AM||#61|
moar necro solution
tldr; this solution fixed the wireless setup issue for 2270dw on 10.8
postamble: just got this little beauty. $120 in Australia (WE PAY MORE IN AUS BECUZ WE LIEK TO!!!1)
had a bloody devil of a time setting it up. the CD didn't work in the mac, i CBF firing up the windows computer to see if the install assistant worked there, so i followed a lot of advice in this thread to download the drivers and wireless setup assistant from brother's site. the wireless assistant hangs and leaving it with the blue bar filling up the progress bar thingy over and over for 10 minutes obviously didn't work either.
once i followed the above link and did the 20 or so steps (lol), all of my 10.8 macs can print wirelessly. I don't know if there is a way to make this AirPrint, if only it could, it would easily be the best value monochrome laser printer on the market.
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|Connecting Stagepiano to Soundsystem using Airplay||peregrines||Digital Audio||0||Oct 12, 2011 06:40 PM|
|Connecting MBA to iMac for screen sharing?||codeoverride||MacBook Air||0||Aug 8, 2011 10:03 AM|
|Connecting PS3 to Internet via Wireless Internet Sharing||Brianstorm91||Console Games||0||Jan 29, 2010 02:44 AM|
|Unable to connect iMac to PC on wireless network||daddy||Mac Basics and Help||8||Aug 2, 2009 08:10 AM|
|Connect iPod to portable radio wirelessly, possible?||jonkemerer||iPod||3||Apr 20, 2008 07:35 PM|
All times are GMT -5. The time now is 03:23 AM.