|May 1, 2013, 08:33 PM||#1|
Using AppleTV For Audio Only
Hi, just wondering if someone could confirm a few things for me.
I'm looking for a solution on how to wirelessly play ALL audio from my MBP using external speakers. I've looked at pairing AirPort Express and Airfoil but this isn't suitable due to the audio delay on video. Hence why I'm now looking at ATV.
The majority of the time, the ATV won't actually be connected to a TV, only the optical cable to external speakers. Can I use this setup to ALWAYS have audio playing through the ATV unless I change the output settings?
I've read reports that by mirroring the screen (even though there will be no HDMI cable connected) it will play the audio through the attached external speakers. Is this correct?
|May 1, 2013, 09:07 PM||#2|
I play audio only all the time from my iPad and iPhone. I haven't tried it from the computer but the controls look the same. At the right of the volume control is a rectangle with a black, solid triangle at the bottom pointing up. Click this and you'll see the options for Apple TV and any Express devices on the network.
I have our ATV connected to a TV but it is usually turned off when I listen to music or podcasts.
|May 1, 2013, 10:23 PM||#3|
in doing a quick test, playing a video in VLC, and using airplay mirroring to an aTV, the audio and video were in sync on the aTV, but was out of sync with the video on the macbook screen. (no audio coming out of the macbook speakers).
It's not as bad as airfoil, probably less than a 1/2 second, but still would be unwatchable in my book.
same result using quicktime player
retina macbook pro - strong 802.11n 5GHz wireless, all up to date.
aTV3 - wired ethernet, latest software
also i've seen people have issues if they don't have a display connected to the aTV, you will need one at least for setup, but doesn't have to be on, just connected, for everyday use.
also you can change your audio output to an airplay device, but ...
--if it's an aTV, it will switch to airplay mirroring if you launch a video player, and you will run in to the same problem with it being slightly out of sync. (stops mirroring when you close the player)
--if it's an audio only device, the audio will be 2 seconds late.
all audio only airplay (including airfoil) has about a 2 second buffer built in.
you can see this if you skip tracks, do it while listening locally, and again using airplay, locally starts the new track almost immediately, airplay will pause for a moment.
|May 2, 2013, 06:53 PM||#5|
Tools -> Track Synchronization
Adjust the delay +/- so that the video would play a little later and that might help the sync issues.
If the audio is 2 seconds late, set the audio track synchronization to "-2.000" (Hasten), which will play the audio early, thereby offsetting the delay introduced.
|May 2, 2013, 08:29 PM||#6|
I was meaning to mention that myself actually as a way to get around it, but still leaves the issues with video on safari, etc.
As ATV doesn't seem suitable, does anyone know a method of getting all audio through external speakers wirelessly? I currently have a bluetooth receiver in use but it is ridiculously unreliable, even to the point that if i am over about 2 metres away there is constant interruption.
Not too sure if this is really the place to ask though, sorry if not.
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|AppleTV Optical Audio to 3.5mm desktop speakers?||naked||Apple TV and Home Theater||6||Jan 23, 2014 05:01 PM|
|Convert / Playback multichannel DTS audio on an AppleTV?||blueroom||Apple TV and Home Theater||2||Jan 23, 2014 02:49 PM|
|Home Audio Receiver Compatible with AppleTV....||TrentS||Apple TV and Home Theater||8||Dec 11, 2013 10:37 AM|
|Can't get audio mirroring from iPad 2 to AppleTV 2||primedime||Apple TV and Home Theater||0||Nov 15, 2012 03:12 PM|
|AppleTV - Audio Cutting Out||MattDell||Apple TV and Home Theater||3||Oct 28, 2012 02:34 PM|
All times are GMT -5. The time now is 05:57 AM.