MakeMKV with Samsung SE-506BB Blu-Ray drive

MadJens · Feb 21, 2013, 11:01 AM

Hi everyone

I just got my iMac 21.5 and am blown away! Just breathtaking, amazing, no words left! But now to my first problem with the new iMac:

I downloaded MakeMKV and hooked up a Samsung Blu-ray drive (SE-506BB) in order to rip a Blu-Ray. However, MakeMKV somehow can't open the movies that I tried. To this day I have only used Windows, so I have no clue whatsoever how to for example update the firmware of the drive!? Or what else could be the problem?

Many thanks in advance for your patience.

MadJens

Richdmoore · Feb 21, 2013, 11:16 AM

I have a SE-506 bluray drive hooked up to my imac, and using the OSX version of MakeMKV it works fine.

One issue I did initially have was using the drive with a USB hub. It powered up, but didn't work, and had intermittent read errors. I discovered plugging both USB plugs (from the bluray drive) directly into my imac solved the issue.

My current setup, I have both the drives USB plugs inserted into it's own 4 port powered hub. That hub is then plugged into my main 7 port hub, which is hooked into a single USB plug on my imac. This setup provides enough power for the drive to work without intermittent errors.

I would troubleshoot by bypassing any USB hubs you have, to see if you have the same power issue I had.

MadJens · Feb 21, 2013, 11:42 AM

Hmmm, in my package there was only one USB cable...

MadJens · Feb 21, 2013, 12:07 PM

I tried again now, and suddenly it works... very strange! Although the estimated time remaining for 39GB is 2 hours!! My 2 years old vaio laptop only needed like 30 minutes... Is this normal behaviour with a maxed out late 2012 21.5 iMac?

Feb 21, 2013, 11:01 AM	#1
MadJens macrumors newbie Join Date: Jan 2013	MakeMKV with Samsung SE-506BB Blu-Ray drive Hi everyone I just got my iMac 21.5 and am blown away! Just breathtaking, amazing, no words left! But now to my first problem with the new iMac: I downloaded MakeMKV and hooked up a Samsung Blu-ray drive (SE-506BB) in order to rip a Blu-Ray. However, MakeMKV somehow can't open the movies that I tried. To this day I have only used Windows, so I have no clue whatsoever how to for example update the firmware of the drive!? Or what else could be the problem? Many thanks in advance for your patience. MadJens
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Feb 21, 2013, 11:16 AM	#2
Richdmoore macrumors 6502a Join Date: Jul 2007	I have a SE-506 bluray drive hooked up to my imac, and using the OSX version of MakeMKV it works fine. One issue I did initially have was using the drive with a USB hub. It powered up, but didn't work, and had intermittent read errors. I discovered plugging both USB plugs (from the bluray drive) directly into my imac solved the issue. My current setup, I have both the drives USB plugs inserted into it's own 4 port powered hub. That hub is then plugged into my main 7 port hub, which is hooked into a single USB plug on my imac. This setup provides enough power for the drive to work without intermittent errors. I would troubleshoot by bypassing any USB hubs you have, to see if you have the same power issue I had.
	0

Feb 21, 2013, 11:42 AM	#3
MadJens Thread Starter macrumors newbie Join Date: Jan 2013	Hmmm, in my package there was only one USB cable...
	0

Feb 21, 2013, 12:07 PM	#4
MadJens Thread Starter macrumors newbie Join Date: Jan 2013	I tried again now, and suddenly it works... very strange! Although the estimated time remaining for 39GB is 2 hours!! My 2 years old vaio laptop only needed like 30 minutes... Is this normal behaviour with a maxed out late 2012 21.5 iMac?
	0