Mac Mini A1176

laweh · Feb 15, 2013, 01:39 PM

Hi there. I disconnected the cable from my A1176 mini to phillips monitor, to use on another machine. Now that it is reconnected to the mini, i get ' no video input' message on the screen. Would appreciate any help to get up and running again.
Thanks in advance.

paulrbeers · Feb 15, 2013, 01:53 PM

Quote:

Originally Posted by laweh

Hi there. I disconnected the cable from my A1176 mini to phillips monitor, to use on another machine. Now that it is reconnected to the mini, i get ' no video input' message on the screen. Would appreciate any help to get up and running again.
Thanks in advance.

Did you restart the mini after reconnecting? Are you sure your Monitor is on the right input for the Mini? Could you have damaged the cable between them?

Edit: What I am trying to say is, "What have you tried to do, to remedy the situation?"....

laweh · Feb 15, 2013, 02:06 PM

Only restarted after cable reinstalled. The cable worked fine on the other machine.
The adaptor from the mini to the vga cable was tight to remove.

laweh · Feb 17, 2013, 02:57 AM

thanks all. Problem was bent pins on adaptor between mini and vga cable.

Feb 15, 2013, 01:39 PM	#1
laweh macrumors newbie Join Date: Aug 2012	Mac Mini A1176 Hi there. I disconnected the cable from my A1176 mini to phillips monitor, to use on another machine. Now that it is reconnected to the mini, i get ' no video input' message on the screen. Would appreciate any help to get up and running again. Thanks in advance.
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Feb 15, 2013, 02:06 PM	#3
laweh Thread Starter macrumors newbie Join Date: Aug 2012	Only restarted after cable reinstalled. The cable worked fine on the other machine. The adaptor from the mini to the vga cable was tight to remove.
	0

Feb 17, 2013, 02:57 AM	#4
laweh Thread Starter macrumors newbie Join Date: Aug 2012	thanks all. Problem was bent pins on adaptor between mini and vga cable.
	0