|Jul 15, 2013, 01:31 AM||#1|
CUDA 5.0 Install Process
I got hold of the 5,1 3.3 and have installed an EVGA GTX680 and 48GB of RAM (of which 32GB is working - one of the sticks appears to be deadski...). Have installed NVIDIA Web Driver 313.01.02f01.
Running the Amira 5.5 Beta, Amira didn't initially detect the 680 as a CUDA device, so I went through the Install Process for the CUDA 5.0 drivers and Toolkit. http://docs.nvidia.com/cuda/cuda-get...-for-mac-os-x/
When I run deviceQuery, my output differs to that in the installation guide in one area - at the end I have:
deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 5.0, CUDA Runtime Version = 5.0, NumDevs = 1, Device0 = GeForce GTX 680
I don't get the next line, which in the user guide is:
Similarly, in bandwidthTest I do not get the last line:
The particles sample works well despite this - ~430fps.
Amira, however, brings up an 'unspecified launch error' whenever I try to run a CUDA-accelerated filter using the GTX (which is now listed in the CUDA device drop-down).
Another thing I noticed is that the driver versions in the CUDA preferences (313.01.02f01) and CUDA-Z (310.40.00.05f01) do not seem to match?
Should I be using OS X Default instead of the nvidia web driver?
Is the presence of the dodgy DIMM having an effect?
|Jul 15, 2013, 03:59 AM||#2|
Don't know if it helps but I found exporting in iMovie 11 ( fully updated ) on 10.8.4 on the Mac Pro sould consistently crash out with error, when using the Web Driver.
Returned to Default Driver and iMovie 11 completes the Export.
As such is definitely worth trying the Default Driver and seeing of still have issue.
Mac Pro 2010 - 3.33Hex, 12Gb DDR-1333, Toshiba 256SSD, OCZ Vector 512Gb x 3 on Sonnet SSD Pro,
4 x 1Tb Samsung F3 SW RAID0, Zotac 680GTX 4Gb
|Jul 15, 2013, 06:59 AM||#3|
I don't know about Amira, but the CUDA Toolkit is required if you want to develop Applications which use CUDA.
From an end user viewpoint it should be sufficient to install the nVidia graphics driver and the CUDA driver.
Your CUDA driver has to match your GPU driver. You may check this from the system preferences with the CUDA panel.
Last edited by tomvos; Jul 15, 2013 at 12:56 PM.
|Jul 15, 2013, 08:32 AM||#4|
|Jul 15, 2013, 07:53 PM||#5|
Still no cigar, unfortunately.
|Jul 16, 2013, 12:53 AM||#6|
I checked the results of deviceQuery and bandwidthTest on my Mac. They are exactly the same. So I don't think that they are pointing to some issue.
CUDA-Z also does pick up the version number of the Apple driver instead of the nVidia-Web driver. I think this is a minor bug of CUDA-Z, because the Apple System Profiler shows unambiguously that the NVDAGK100HalWeb (313.01.02f01) extension is loaded.
I would still try to remove the faulty DIMM and try again. Also try switching back to the Apple driverójust in case. If this does not help, contact support at Amira. Perhaps they can tell you where to find a logfile which indicates the source of the problem.
You might want to look at the console applicationóit might have a report about Amira crashing. Though this is probably a bit technical. Good luck.
|Jul 16, 2013, 01:23 AM||#7|
The DIMM is out - have asked the vendor to replace all three as the working two were also running at 1066. Unfortunately that didn't change the result. Have also tried with the OSX Driver. Under all those conditions, the particle demos work well and CUDA-Z looks to be all in order (apart from the driver version bug that you mentioned).
I have sent an email off to Amira asking for help - I'll let you know what they say. In the meantime, back into Windows....
|Thread Tools||Search this Thread|
All times are GMT -5. The time now is 02:12 AM.