|Dec 15, 2012, 11:41 AM||#1|
HELP! Macbook water damaged!
Last night i spilt half a glass of water on my desk and went back to bed. It had not spilt directly on my mac which was on the same table.
This morning however, i noticed that some water had seeped underneath my macbook but assumed that wouldn't be a problem. When i tried to turn on my macbook the display was flickering for about 5 minutes straight until it went back to normal and i assumed there was no problem.
Few minutes later the screen is pitch white but i know the actual computer is still on, i just can't see it. What should i do? I turned it off
|Dec 15, 2012, 11:48 AM||#2|
Main thing... get power off and let it sit long enough for everything to dry thoroughly. Hopefully the fault disappears when the water dries. Give it a day or two.
iMac 27" i7 2.8GHz 16GB-1333 180GB Intel 330 SSD
Last edited by OllyW; Dec 15, 2012 at 12:53 PM. Reason: clean up after moving thread
|Dec 15, 2012, 11:53 AM||#3|
Take the battery out - if applicable.
Remove the hard drive.
Place the Macbook open in a 'tent' position so any water drains away from the machine.
Let the machine sit in a warm environment. If you have an airing cupboard this will be ideal.
Do not touch the machine for at least 3 days.
When it is completely dry, try and power the machine on.
If it does not start then use isopropyl alcohol to clean around any areas where the water damage indicators have indicated damp.
27" - 21.5" iMac SSD UPGRADE TUTORIAL
|Thread Tools||Search this Thread|
All times are GMT -5. The time now is 12:42 PM.