|Apr 14, 2013, 09:53 AM||#1|
Unable to play 1080p content on AppleTV
OK have a strange issue......
- Livingroom AppleTV - 3rd Gen AppleTV (1080p) - v5.2.1 - Ethernet connected 100Mbit/s
- Bedroom AppleTV - 3rd Gen AppleTV (1080p) - v5.2.1 - Ethernet connected 100Mbit/s
- iTunes Library - Mac Mini (Mid 2001) ML 10.8.3 / iTunes 11.0.2 - Ethernet connected 100Mbit/s
- Router/switch - Sky Hub SR101 - Location Livingroom
I have 1080p locally stored content in iTunes that plays perfectly on the Livingroom ATV. I'll supply one example file for reference. 1920x800 @ 8754kbps, low complexity, file size around 9GB. This example starts playing after about 1 - 2 seconds, and plays perfectly on the Livingroom ATV. Flicking between chapters is almost instant.
If I attempt to play the same 1080p file (or any other 1080p files) on the Bedroom ATV then it sits with the spinning wheel and does nothing. I assume it would start playing eventually but i've never waited long enough to find out. SD and 720p content plays perfectly on this Bedroom ATV (see attached image).
At first I though it might be a cable issue, so I tested the bandwidth across the ethernet link (using iperf) and the results are 95Mbps, so bandwidth across the ethernet link isn't a problem. I also tested the link using a different device and it was able to stream HD content no problems at all.
I also tested the bandwidth on the link the Livingroom ATV uses and that also gives 95Mbps (an expected result for a 100Mbps link).
Next test was to swap the ATV's location around to see if the fault followed the ATV or stayed at the location.
The fault stayed at the location, so the Livingroom ATV is now in the bedroom and that ATV now can't play 1080p content from iTunes.
Bedroom ATV now situated in the livingroom can play the 1080p content fine.
So that would suggest a problem with the ethernet link in the bedroom, but the bandwidth tests suggest otherwise. I also connecte my MBP to the bedroom ethernet link and the same 1080p file played fine on the MBP via Quicktime.
The cable run from the bedroom to the router (which is in the livingroom next to the Livingroom ATV) is around 20 meters (Cat5E cable terminated to wall sockets).
So...... any thoughts?
|Apr 14, 2013, 11:50 AM||#2|
Since you've eliminated the ATV device (it works on a different connection) and confirmed the problem on that connection with a second ATV device, it's almost certainly the connection. The only other thing could be something environmental to that location (e.g. RFI or power problem).
If feasible, string a long Ethernet through the house to that device, bypassing your installed cable run. If it works with that, you have absolutely isolated it to a cabling issue. If it fails with that, the cabling is fine & it's environmental.
|Apr 14, 2013, 01:11 PM||#4|
i even tested it with 2 gigabit devices at each end, ran iperf and the bandwidth test gave 980Mbps, so it appears the cabling is performing as expected.
i've connected other devices using the existing cabling and 1080p content streams normally. that's what makes this so confusing that the appletv cannot do it.
this was the last iperf test run on the cabling
Client connecting to 10.0.1.3, TCP port 5001
TCP window size: 129 KByte (default)
[ 4] local 10.0.1.99 port 60749 connected with 10.0.1.3 port 5001
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 1.0 sec 112 MBytes 935 Mbits/sec
[ 4] 1.0- 2.0 sec 111 MBytes 932 Mbits/sec
[ 4] 2.0- 3.0 sec 111 MBytes 933 Mbits/sec
[ 4] 3.0- 4.0 sec 111 MBytes 933 Mbits/sec
[ 4] 4.0- 5.0 sec 111 MBytes 932 Mbits/sec
[ 4] 5.0- 6.0 sec 111 MBytes 933 Mbits/sec
[ 4] 6.0- 7.0 sec 111 MBytes 933 Mbits/sec
[ 4] 7.0- 8.0 sec 111 MBytes 933 Mbits/sec
[ 4] 8.0- 9.0 sec 111 MBytes 933 Mbits/sec
[ 4] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec
|Apr 14, 2013, 01:43 PM||#6|
|Apr 14, 2013, 01:53 PM||#7|
Change switch port if u haven't done so. Did u wire the CAT5 yourself, u followed EIA cable pairings correct? While spinning, look at the switch and make sure it's solidly on 100mbit and not 10.
|Apr 14, 2013, 03:23 PM||#8|
yes wired myself and punched down as per cat5e spec.
iperf bandwidth tests show the cable is running correctly at 100Mbps and 1000Mbps (bandwidth report shown in previous post).
when testing the cable with other devices it streamed 1080p content fine, it just seems to be the appletv that can't for some reason.
|Apr 14, 2013, 03:36 PM||#9|
I don't have a long enough cable at the moment to test alternate connection, but when I do I will to see what happens.
I'm still not convinced it's a cable problem though (even though everything points to it), as the iperf tests all give expected results.
Checked the router logs and it was rebooted 36 hours ago (due to firmware upgrade), so rebooting the router hasn't made any difference.
|Apr 14, 2013, 04:10 PM||#10|
Assuming no layers 2-3 (MAC-IP) problem, then the remaing culprit is layer 1, the cable, which u can verify quickly if u can run a long extension as mentioned.
The ATV *may* (am reaching here) requires "tighter" layer-1 compliance.
|Apr 14, 2013, 06:57 PM||#11|
The other test your missing
Have you tried to move the actual TV set out to the other room to isolate it? Are the two sets the same model and brand? It is possible its a syncing issue of the TV set with 1080p material?
|Apr 14, 2013, 08:52 PM||#12|
|Apr 15, 2013, 08:02 AM||#13|
well i may have had a break-thru.
i decided to take a close look at the files, and noticed that they weren't optimised (for streaming).
i ran one of the files thru subler and optimised it, and it started to play normally on the problematic ATV.
what doesn't make sense though is why it was able to play fine on the other ATV even when it wasn't optimised.
i've only checked one file so far, so will go and check a few others and see what happens.
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|AppleTV 3 Tested: 60fps 1080p||Mr Dobey||Apple TV and Home Theater||41||Jan 2, 2015 02:03 PM|
|Can ATV2 downscale 1080P content from iTunes Store?||Narked Diver||Apple TV and Home Theater||16||May 6, 2014 10:29 PM|
|Apple TV 2, downscale 1080p content?||ra4oasis||Apple TV and Home Theater||3||Dec 25, 2012 09:15 PM|
|1080p content / Apple TV (2nd Gen) / 1080i TV||wayne905||Apple TV and Home Theater||4||Jul 24, 2012 11:07 AM|
|Unable to play 1080p files with DTS 1,5mbps||spiderben25||Mac Basics and Help||0||Jul 4, 2012 07:29 AM|
All times are GMT -5. The time now is 12:23 PM.