Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

Sunandrey

macrumors newbie
Original poster
Sep 2, 2009
3
0
Hello to all.
I changed 5130 to X5365. After the upgrade, my MacPro 1.1> 2.1 sees only 6 cores.
I changed the places of the CPU, dropped PRAM, but that does not help.
If I run only one CPU in the lower processor tray, the work only 2 cores with one and the other CPU.
If I run only one CPU in the top processor tray, the Mac does not start with one and the other CPU.
Communists are marked SLAED
I've tried to do all the operations with another couple CPU also SLAED, but the result is the same.
Guys, what could be wrong?
Screenshot%2010.06.13%2014:44.png
[/url]Click for large view - Uploaded with Skitch[/IMG]
 

666sheep

macrumors 68040
Dec 7, 2009
3,686
291
Poland
Check if there any bent pins in CPU sockets.
Try to mix couples and see if it would change anything.
Matching pair isn't a must in MP.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.