|May 24, 2011, 10:34 PM||#26|
Vertex 2 3.5"
Does anyone know if this will mount into the Mac Pros Sata Bay?
2013 MacBook Pro Retina 13" 2.5GHz/i5/8GB/256GB SSD
2013 iPhone 5s 1.2GHz/A7/1GB/32GB
2013 Mac Mini 2.5GHz/i5/16GB/120GB SSD+500GB HD
|May 25, 2011, 11:12 AM||#27|
How are reviews on the Vertex.
|May 25, 2011, 11:29 AM||#28|
If you want to put it in the optical bay as you stated earlier, you'll still need a 3.5" to 5.25" adapter.
|Aug 19, 2011, 11:54 AM||#29|
Thanks! Did this last night, on my new mac pro and it worked great.
I tried drilling holes and screwing in the SSd to the CD, but the only bolts I have don't match the thread pitch on the SSD body, so I had to use tape.
I tried velcro, but it was too bulky. Tape it is, until, I get the right bolts/screws, and then I'll just mount it with screws.
I also couldn't get my head around $25 adapters...
|Sep 7, 2011, 09:11 AM||#30|
HXGuy, I like your second attempt. Are you still planning on doing a write up for this?
Early 2008 Mac Pro, single quad core CPU, 10 GB RAM, 8800GT, 128 GB SSD, 2 TB drive, 1 TB drive, 750 GB drive, 30" ACD
|Sep 27, 2011, 06:03 AM||#32|
These ideas look great - but I worry about cooling. Would definitely want to drill a bunch of holes in any of those sheets - so that airflow can better reach the SSD enclosure...
|Sep 27, 2011, 06:06 AM||#33|
My SSD just hung in the case on the connector. No problem.
Mid 2011 27" iMac x 2 (i5 & i7) - Early 2008 Mac Pro (deceased) - Late 2009 Mac Mini - 64Gb iPad 2
TV - TV2 - iPod(s), 64Gb iPhone 4S - 3Tb Time Capsule - Airport Extreme Base Station
|Sep 27, 2011, 07:09 AM||#34|
Thanks for posting these ideas!
I am thinking about going down the SSD route and don't like the look of the adapters I have found.
|Sep 4, 2012, 09:29 AM||#35|
Zombi Thread Resurrect
Utilizing a SATA connector that is surface mount soldered to a vertical PCB as your only form of support = either you're saudi royalty rich or just plain too careless to deserve a $3k + computer.
Masking tape and compact discs is a ridiculous over expenditure of workmanship. Aside, any sort of tape...not so good an idea.
Those OWC shelves look perfect, but they're $20 a pop; and you already have a sled.
Traditional sleds won't work, because you'll need a sata cable, and there's just not enough clearance without trashing connectors/joints/cable.
But this is all mute.
Looking at an SSD, let's consider the connector side, positioned so that it's at the left (for mac pro connection) the top. The backmost, leftmost mounting hole lines up with the backmost, leftmost mounting screw on the Mac Pro sled. You'll have to remove (and save or toss) the leftmost screws on the Mac Pro sled and obtain the correct size screws for your ssd. Nonetheless, you've got one corner covered, free.
The leftmost right most screw hole on the sled will have to remain a "wash". It won't be used.
For the right side, you're looking for something like this:
You can remove the extraneous hinge stuffs.
The backmost/rightmost mount for the ssd is flush to the sled's mount; so you can use anything that is between 2 and 3 inches in length (5.1 to 7 cm).
For the right most/top most, we have an angle to contend with. The distance is 2 inches (5.1 cm) center to center.
If you own a drill press, or proper drill bits and a steady hand; you can buy flat brackets at the hardware store. They may have oil or lubricant on them, however and are often made of unpainted/treated zinc. Not sure how that will chemically interact inside of the computer.
Buttt, if you own a drill press; you are probably aware that you can always order metal plate from companies like "speedymetal" or "onlinemetals", although, at such a small size, I'd just buy a stainless steel wall plate and adjust from there.
I recently grabbed some pre-drilled brackets from the hinge section of a hardware store. They matched up, so I'll chime in if it works. I'd have preferred a flat hinge ala my example, but know one around carries them for some reason.
|Sep 4, 2012, 01:28 PM||#36|
|Nov 11, 2012, 03:08 AM||#38|
I believe it's called: bad reaction to meds. :0
Ps - I totally just bought osx sleds.
|Aug 10, 2013, 09:28 AM||#39|
SSD adapter for even less $
This describes a DIY adapter for a 2'5 SSD mounting in a standard MacPro-bay.
Time: 20 minutes.
Cost: less to nothing
Level: if you can hold a drill you’ll succeed!
Details: leaves no permanent marks on your Mac or any accessories.
What you’ll need:
-aluminium sheet, 90 x 105 mm, thickness around 0.5 mm
This sheet material should be sturdy, but somehow flexible as well.
(I took mine from an old fridge-door…)
-2 bolts for the SSD (M3-size for the Samsung I was about to install)
-2 nuts and bolts M5 (for the MacPro-bay)
This how to:
Refer to the drawing below. This has a 5mm grid.
1. Cut the alu-sheet to size with the knife-cutter.
2. drill 2 holes 3.5m
3. drill 2 holes 5mm
Use a file to smooth any irregularities. Now keep your work area free from any aluminium particles messing up delicate electronics!
4. mount the SSD with the two M3 bolts.
(after you've seen the final result, you will understand you won't need the other 2 bolts)
Now you have your SSD-base ready.
5. Remove the bolts (and its rubbers) from the MacPro-bay
(the rubbers prevent vibration from a HDD-drive; SSD won't need this)
6. Fix the SSD-base to the MacPro-bay with two M5-nuts and bolts.
Align and fix, according to any other available HDD-bay from your Mac.
7. Now retract your SSD-bay carefully in your Mac. Don’t force!
When it doesn’t fit easily, try to re-align your SSD-base and try again.
Mine worked flawless at first attempt!
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|Poor SSD on Mac Pro 5,1 (2010) with two different ssd brand||Randall Flagg||Mac Pro||9||Jan 4, 2014 01:51 PM|
|2012 mac pro PCIe SSD card SATA6 SSD ?||joecool99||Mac Pro||7||Oct 21, 2013 05:45 AM|
|Orico SSD optical bay adapter -OK for Mac Pro?||macstatic||Mac Pro||5||Jan 25, 2013 11:17 PM|
|Seagate Thunderbolt Adapter + Samsung 840 Pro vs. Lacie 120 GB Rugged SSD||loscamos||iMac||11||Jan 24, 2013 08:04 PM|
All times are GMT -5. The time now is 04:19 PM.