|Aug 14, 2013, 01:52 PM||#1|
Sequence settings for Premiere?
When setting up a sequence in Premiere, what resolution should I use if I'm uploading to YouTube @1080 but my base "footage" (read: FRAPS capture) is 2560x1440?
All the googling I've done talks about issues related to burning to DVDs or movies or some type of super professional stuff that is nowhere near what I'm doing and gets into stuff that I either don't understand or can't relate to.
I understand that if all my base video is the exact same resolution, it probably shouldn't matter, and if I scale all the 1440 video down to a 1080 sequence, when I export it, it will look pretty much exactly the same as if I had a 1440 sequence and exported it as 1080.
However, I want to bring in video clips from other places that are either full screen captures taken at a different resolution (so far always smaller) or zoom areas to blow them up for call outs or have small clips size-scaled up or down to do different things (like talking-heads or picture-in-picture or whatever).
Nothing I do is very elaborate or important (all hobby stuff), but I'd like to do a decent job of it.
Thanks for your time and help, and my apologies if I'm being unclear.
|Aug 14, 2013, 07:10 PM||#3|
Premiere expects your sequence settings to match whatever your main footage is. These settings are independent of the export settings, which you choose as your output (they have plenty of built in YouTube and Vimeo settings for exports). Basically the render engine relies on the expectation that it will be interpreting a certain kind of file. when it encounters a different format than it was expecting, it will still work (and is one of the biggest advantages of premiere over its competition) but too many different formats in the same sequence will quickly cause unexpected crashing. As I said, just make sure to set your sequence to whatever footage you expect to be working with the most.
|Aug 14, 2013, 11:31 PM||#4|
Thanks for your time.
The fraps video I capture is basically all fullscreen gaming stuff that I do at 2560x1440. I export video to upload to YouTube at 1080p.
What I have been doing thus far is the "create new sequence from clip", which makes a sequence with the 1440p resolution. Generally this video acts as a backdrop for everything else I want to put in, like text, small video overlays and, etc.
When I reference using different resolutions, what I mean is that I may pull in other video clips that have resolutions different than 1440. These other videos I may scale up or down to fit different regions of the screen. It's mostly these other clips I'm worried about.
Then, after all of that will be done, I'm only exporting to 1080 to upload.
My concern is about resolution degradation of these other clips.
For instance, if I set up a sequence to be at 1080p, I can still have my base footage at 1440, and simply scale the video down. I did some testing and, if I don't mess with anything else, I see virtually no difference between rendering a 1440p sequence at 1080p OR rendering a 1080p sequence with the video scaled down to that size canvas.
I will try to offer a somewhat convoluted example...
Let's say I have a small overlay video that's 25x25 that I want to take up a quarter of the screen which will be rendered at 100x100.
If my sequence canvas is set to 200x200 (because that's the size of the base video), I would have to double the size of the overlay video while doing things in the timeline.
My concern is that the final rendered video (at 100x100) will make the small overlay look crappier than need be.
Again, I appreciate you guys responding. I've found the posters at MacRumors tend to be far more helpful than in other nooks of the Internet.
|Aug 15, 2013, 11:38 AM||#5|
Keep in mind if youre editing in a large sequence size, the renders will be longer.
I'd recommend transcoding your footage to a friendly, easily workable codec (1920x1080, apple pro res) for example... otherwise trying to edit in a non-native/broadcast friendly format can make editing frustrating.
27" 2011 iMac, 3.4 GHz, 12 GB RAM, 1TB HD, ; iPhone 4S 16gb ; iPad Mini 16gb ; iPad 4th Gen 32gb
|Aug 16, 2013, 08:17 AM||#6|
So. The sequence I create in Premiere is from the "DSLR" choices, specifically the 30fps 1080p one. I then drop the 5760x1200 footage onto it, and a dialog pops up asking me if I want to change the settings of the sequence or keep them. I keep them. The results of that: a 1920x1080 "window" into the dead center of that larger footage. The problem is that while the width is perfect, the height is still 10% too large (1200 > 1080). So in the "Motion" part of the effects settings, I drop the height to 90%, and voila: I have a 1080p version of my 5760x1200 game.
Now, I'm not sure if that will help you, because you're only taking vid from one panel. I'm taking it from three and trying to export just the center panel. You may have to play with the scaling a little more.
|Aug 20, 2013, 12:32 AM||#7|
Jasonvp, I can't imagine the storage issues you must have. I have a 4TB that I Fraps onto and then just trash the files after I upload.
I think I'm resigning myself to the "make sequence from clip" for now, mostly because of sloth.
If I ever make a header for my videos (or actually figure out how to do nifty things in After Effects (without additional monetary investment)), I'll probably render that out at 1080 and then just use that to start the sequence and scale everything down later.
Thanks for sharing your experience.
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|FCE Sequence Settings||AntonFischer||Digital Video||3||Jun 17, 2013 01:03 PM|
|How to change '2 Outputs' to '1 Stereo' in Sequence Settings FCP 5.1.4||AngusBarr||Digital Video||2||May 1, 2013 02:36 PM|
|Distorted splash sequence?||cosmichobo||Apple TV and Home Theater||0||Oct 16, 2012 05:26 AM|
|Resolved: Photo import sequence||Kanunu||iPad Tips, Help and Troubleshooting||1||Sep 25, 2012 11:29 AM|
All times are GMT -5. The time now is 06:27 PM.