|Jun 27, 2013, 02:02 PM||#26|
Given the recent bump, I figured this thread was as good as any to respond to.
I just picked up an Early 2008 24" iMac 3.06 C2D. smcFanControl tells me that the ODD fan is running at full speed all of the time. I did an SMC reset and a PRAM reset to no avail.
I ran the Apple Hardware Test and got this code:
4SNS/1/40000000: T00P - 128.000
Does it seem like replacing this sensor should cure my issues? I see several temperature readouts in iStat but nothing seems out of line or failed, and there isn't a sensor listed for the optical drive. Am I missing something?
|Jul 8, 2013, 06:57 PM||#27|
In case anyone finds this in the future, the optical drive temp sensor fixed my problem. Instead of paying $15 for the suction cups from iFixit, I found identical units at my local home improvement store for $2. I picked up a driver/bit set containing all of the torx bits I needed for about $6. I got part number 922-8222 from AppleComponents.com. It took nine days after ordering for the part to come in, but it did the job.
Before, as soon as the computer was turned on, the ODD temp sensor would climb to 127 degC and then blank out according to Temperature Monitor. Now it's holding steady at around 26 degC and the ODD fan is at 700rpm.
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|Late 2009 iMac 27" HD swap and fan issue||ECJ||iMac||4||Mar 26, 2014 10:49 AM|
|iMac 27" HDD Fan full speed - random||iDutchman||iMac||2||May 15, 2013 02:26 AM|
|iMac CPU fan at full speed||Ken Li||iMac||8||Apr 12, 2013 01:04 PM|
|Late 2012 iMac - Fan speed and Temps under full CPU load||Ynk||iMac||0||Jan 19, 2013 03:10 PM|
|Temperature and Fan speed test - Late 2012 iMac||newtumor||iMac||4||Jan 13, 2013 07:31 AM|
All times are GMT -5. The time now is 10:40 PM.