Register FAQ / Rules Forum Spy Search Today's Posts Mark Forums Read
Go Back   MacRumors Forums > Apple Hardware > Notebooks > MacBook

Reply
 
Thread Tools Search this Thread Display Modes
Old Mar 18, 2008, 09:12 AM   #1
VoodooDaddy
macrumors 65816
 
Join Date: May 2003
Transfer files via ethernet from one Macbook to another

Wanting to move a large number of files via ethernet from an older macbook to a newer one. Dont want to user MA either.

I know Ive seen it said that you can do this using Appletalk, but now I cant find any info about it. Googling, I only came up with links dealing with pc -> mac transfer, or old info, like g3 imac -> imac, that type of thing.

Seems when I saw this it said to use Appletalk from the network settings. Is that all it takes? Do I just check 'make appetalk active'? As far as the 'appletalk zone', what goes there? And I assume 'configure automatically' is the best selection there.

Or....Is there a better way not using appletalk?
VoodooDaddy is offline   0 Reply With Quote
Old Mar 18, 2008, 09:17 AM   #2
mackindergarten
macrumors 6502
 
Join Date: Feb 2008
Hi,

I suggest, you just use static IP addresses on both machines. Use a standard Ethernet cable to connect the both.

Connect via Finder.
Transfer files.

This should do it. There are a couple of other threads on this topic as well.


Hope this was helpful.

/Rupert
__________________
www.mackindergarten.com
Tutorials and How-Tos for Mac Starters
mackindergarten is offline   1 Reply With Quote
Old Mar 18, 2008, 09:43 AM   #3
VoodooDaddy
Thread Starter
macrumors 65816
 
Join Date: May 2003
Quote:
Originally Posted by mackindergarten View Post
Hi,

I suggest, you just use static IP addresses on both machines. Use a standard Ethernet cable to connect the both.

Connect via Finder.
Transfer files.

This should do it. There are a couple of other threads on this topic as well.


Hope this was helpful.

/Rupert
Where would I find the static IP address for each machine? And where would I enter that information in? And lastly, would I have to have file sharing checked or no?
VoodooDaddy is offline   0 Reply With Quote
Old Mar 18, 2008, 09:51 AM   #4
krye
macrumors 68000
 
krye's Avatar
 
Join Date: Aug 2007
Location: USA
Just throw the stuff in your Public folder and file share it. Done.
krye is offline   0 Reply With Quote
Old Mar 18, 2008, 04:39 PM   #5
mackindergarten
macrumors 6502
 
Join Date: Feb 2008
Alright,
here we go:

* Connect both Mac, using a standard network cable

Mac #1:
* Open up System Preferences > Network
* Choose Ethernet, and select Manually instead of Using DHCP.
* Set the IP address to 192.168.0.1, Subnet Mask to 255.255.255.0

Mac #2:
* Same as above, IP address 192.168.0.2

Now you should see the other Mac in the Finder sidebar. As said before, use the Public folder on each Mac to share files and folders.


This should do it, tell me if you need more help.

/Rupert
__________________
www.mackindergarten.com
Tutorials and How-Tos for Mac Starters
mackindergarten is offline   1 Reply With Quote
Old Mar 18, 2008, 04:45 PM   #6
Le Big Mac
macrumors 68020
 
Join Date: Jan 2003
Location: Washington, DC
Quote:
Originally Posted by krye View Post
Just throw the stuff in your Public folder and file share it. Done.
Ya. Or dump it in the other macbook's dropbox.

Or screen share (Leopard only, but can control Tiger) from one macbook to the other and log in with your own account--then you can pull from anywhere, not just public folder. No need for static IP or complex servers or anything.
Le Big Mac is offline   0 Reply With Quote
Old Mar 18, 2008, 04:58 PM   #7
Italchef
macrumors 6502
 
Join Date: Nov 2003
Location: Maple, Ontario
Send a message via AIM to Italchef
Quote:
Originally Posted by Le Big Mac View Post

Or screen share (Leopard only, but can control Tiger) from one macbook to the other and log in with your own account--then you can pull from anywhere, not just public folder. No need for static IP or complex servers or anything.
I was trying to do this to transfer my iTunes and iPhoto libraries. This is from an iMac to a Macbook. I was able to control the macbook's screen but not able to transfer the files. Any idea why?

Mick
__________________
Suck it up, that's how I roll
24" iMac 2.4GHz 500GB HDD 4GB RAM
Pen Macbook 2.4GHz 250GB HDD 4gb RAM ,
17" G4 iMac 1.25GHz, iPhone 4
Italchef is offline   0 Reply With Quote
Old Mar 18, 2008, 05:08 PM   #8
mackindergarten
macrumors 6502
 
Join Date: Feb 2008
Using a direct connection between both Macbooks gives you a Gigabit network connection (= fast). This will save a slot of time, if you have a lot of files to transfer.
If you only have a bunch of small files, go for the Public folder or the Screen Sharing solutions mentioned here.

/Rupert
__________________
www.mackindergarten.com
Tutorials and How-Tos for Mac Starters
mackindergarten is offline   0 Reply With Quote
Old Mar 18, 2008, 11:37 PM   #9
VoodooDaddy
Thread Starter
macrumors 65816
 
Join Date: May 2003
Will need to try the method mackindergarten tomorrow. Today however, I connected both together, turned on file sharing on both, allowed read/write access to both. Put files in the public folder. When I tried to move them over was getting some errors saying I "didnt have sufficient privledges." I gave up and just moved over what I could.
VoodooDaddy is offline   0 Reply With Quote
Old Mar 19, 2008, 03:05 AM   #10
mackindergarten
macrumors 6502
 
Join Date: Feb 2008
Hi,

if you have a connection, you don't need to do "my method" it's only for getting a connection between both Macs.

As for file permissions, Open Info of the Public Folder (command-I), click the lock to unlock and set the right permissions.

Click on the cog wheel icon and select Apply to Enclosed Items.


/Rupert
__________________
www.mackindergarten.com
Tutorials and How-Tos for Mac Starters
mackindergarten is offline   0 Reply With Quote
Old Mar 27, 2010, 02:31 PM   #11
christoinferno
macrumors newbie
 
Join Date: Mar 2010
Am I missing something?

Quote:
Originally Posted by mackindergarten View Post
Alright,
here we go:

* Connect both Mac, using a standard network cable

Mac #1:
* Open up System Preferences > Network
* Choose Ethernet, and select Manually instead of Using DHCP.
* Set the IP address to 192.168.0.1, Subnet Mask to 255.255.255.0

Mac #2:
* Same as above, IP address 192.168.0.2

Now you should see the other Mac in the Finder sidebar. As said before, use the Public folder on each Mac to share files and folders.


This should do it, tell me if you need more help.

/Rupert
I tried this, following the directions exactly, a few times. I even restarted each time I made a change, just in case. Nada. Virtually nothing happened. Is there more to this?
christoinferno is offline   0 Reply With Quote
Old Mar 23, 2011, 09:01 PM   #12
impossiblyfree
macrumors newbie
 
Join Date: Dec 2010
rupert, thanks for taking the time to explain this. just reconfigured my network and needed to move a 20gb file to my macbook from the desktop. estimated time, 8 hours. i searched for a direct connection via ethernet and found this thread. 3 minutes remaining.
impossiblyfree is offline   0 Reply With Quote
Old May 2, 2011, 06:33 PM   #13
ano0oj
macrumors 6502
 
Join Date: Apr 2010
Quote:
Originally Posted by mackindergarten View Post
Alright,
here we go:

* Connect both Mac, using a standard network cable

Mac #1:
* Open up System Preferences > Network
* Choose Ethernet, and select Manually instead of Using DHCP.
* Set the IP address to 192.168.0.1, Subnet Mask to 255.255.255.0

Mac #2:
* Same as above, IP address 192.168.0.2

Now you should see the other Mac in the Finder sidebar. As said before, use the Public folder on each Mac to share files and folders.


This should do it, tell me if you need more help.

/Rupert

thank you good sir!
13gb transfer in 7 minutes
ano0oj is offline   0 Reply With Quote
Old May 2, 2011, 06:38 PM   #14
simsaladimbamba
macrumors Core
 
simsaladimbamba's Avatar
 
Join Date: Nov 2010
Location: located
Quote:
Originally Posted by ano0oj View Post
thank you good sir!
13gb transfer in 7 minutes
That is around 32MB/s, are you transferring a lot of small files? Gigabit Ethernet normally provides 70MB/s and much more (up to 110MB/s with the right storage devices).
__________________
FREEdomly passports. Circumwent bürocrazy.
simsaladimbamba is offline   0 Reply With Quote
Old May 15, 2011, 12:09 PM   #15
DavisEngeler
macrumors newbie
 
Join Date: Jan 2010
Great!

Quote:
Originally Posted by mackindergarten View Post
Alright,
here we go:

* Connect both Mac, using a standard network cable

Mac #1:
* Open up System Preferences > Network
* Choose Ethernet, and select Manually instead of Using DHCP.
* Set the IP address to 192.168.0.1, Subnet Mask to 255.255.255.0

Mac #2:
* Same as above, IP address 192.168.0.2

Now you should see the other Mac in the Finder sidebar. As said before, use the Public folder on each Mac to share files and folders.


This should do it, tell me if you need more help.

/Rupert
Thanks for this post and the help. Worked perfect for me on the first try with no problem. 48GB in 14-15 minutes.
DavisEngeler is offline   0 Reply With Quote
Old Jun 2, 2011, 05:49 PM   #16
CalTex
macrumors newbie
 
Join Date: Apr 2011
If I am trying to transfer data from a pc to a mac does the method above also work?
CalTex is offline   0 Reply With Quote
Old Jun 2, 2011, 06:17 PM   #17
simsaladimbamba
macrumors Core
 
simsaladimbamba's Avatar
 
Join Date: Nov 2010
Location: located
Quote:
Originally Posted by CalTex View Post
If I am trying to transfer data from a pc to a mac does the method above also work?
You can connect a Windows PC (if that is what you meant with "pc") to a Mac via Ethernet and if File Sharing is enabled, you can share files between the computers. There might be a guide on how to do this out there.
__________________
FREEdomly passports. Circumwent bürocrazy.
simsaladimbamba is offline   0 Reply With Quote
Old Dec 9, 2012, 05:10 PM   #18
pajhonka
macrumors newbie
 
Join Date: Jan 2009
Quote:
Originally Posted by mackindergarten View Post
Alright,
here we go:

* Connect both Mac, using a standard network cable

Mac #1:
* Open up System Preferences > Network
* Choose Ethernet, and select Manually instead of Using DHCP.
* Set the IP address to 192.168.0.1, Subnet Mask to 255.255.255.0

Mac #2:
* Same as above, IP address 192.168.0.2

Now you should see the other Mac in the Finder sidebar. As said before, use the Public folder on each Mac to share files and folders.


This should do it, tell me if you need more help.

/Rupert
Worked for me also, thank you!

Don't forget to go to "Sharing" in System Preferences and turn on "File Sharing."
pajhonka is offline   0 Reply With Quote

Reply
MacRumors Forums > Apple Hardware > Notebooks > MacBook

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
Crashed Hard Drive - Transfer via Ethernet jmporter MacBook 4 Mar 3, 2014 01:52 PM
Fly Transfer-transfer photos/videos/music/PDF files over wifi flyrabbit iPhone and iPod touch Apps 0 Dec 18, 2013 05:41 AM
How to transfer files from MacBook to iPad? stuart2102 iPad Tips, Help and Troubleshooting 22 Oct 28, 2013 08:00 PM
Can I can transfer files from Ethernet to Thunderbolt WITHOUT migration assistant? circa7 MacBook Pro 4 Aug 29, 2013 08:39 AM
iPad: How to transfer .rom games files from jailbrick iPad 2 to MacBook I am Swift Jailbreaks and iOS Hacks 3 Aug 11, 2013 01:45 AM

Forum Jump

All times are GMT -5. The time now is 08:55 AM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC