Register FAQ / Rules Forum Spy Search Today's Posts Mark Forums Read
Go Back   MacRumors Forums > Apple Hardware > Desktops > Mac Pro

Reply
 
Thread Tools Search this Thread Display Modes
Old Dec 31, 2012, 02:46 PM   #26
pyzon
Thread Starter
macrumors regular
 
Join Date: Jan 2008
you can find them at the bottom of this thread:

http://forums.macrumors.com/showthread.php?t=1516013
pyzon is offline   0 Reply With Quote
Old Sep 25, 2013, 08:09 PM   #27
solarsystemtw
macrumors newbie
 
Join Date: Jan 2013
I can be done with Velocity X2, just...

I have the same configuration, 2X Samsumg 840 with Apricon Velocity X2,
If you want to do a clean install on a RAID0 drive,
You will need to do that PRSM reset,

I spent a whole afternoon to figure it out, Super fast RAID0 drive !!

Quote:
Originally Posted by SDAVE View Post
http://www.hightechdad.com/2012/07/2...-or-usb-drive/

Carefully follow that and it's possible

I haven't had a problem, already installed to 3 machines with the same disk. Technically, ML is below a single layer disk, but Apple made their image bigger.

----------



That is very weird. It might have to do with the Apricorn Velocity card. Maybe you can contact them? Regardless, they can't do much.

Here is another thing you can do, but bear with me, it might take some time (and in theory it SHOULD work). If you have the time, give this a try:

1. Take out all drives from the system, even the Velocity PCIe card.
2. Put the 2 SSD's in bay 1 and 2 (might have to use a SATA+Power cable, or if you have the 2.5" to 3.5" converter, you're good to go. Or use the 2 Optical SATA ports (2009 MP and up), or the 2 ODD SATA ports (If you have a 2008 Mac Pro)
3. Boot off your USB and launch Disk Utility
4. Erase all partitions (to start from scratch)
5. Make a RAID 0 (splices for each), make sure it shows 240GB Total and format your RAID0 as HFS+ (Journaled)
6. Install ML from your USB drive (it will give you an error regarding Recovery mode and Filevault, ignore that)
7. After you're done, boot into OS X and see if all's working fine.
8. Turn off system.
9. Reconfigure both your drives to the way you had it with the Velo x2, ie, one on the PCIe board and one in the Optical bay via the extra SATAIII port on the Velo x2 (I wouldn't mount it just now, just leave it hanging to see if it works).
10. Start your machine to see if it boots into OS X, if it does, you're golden. If it doesn't, I would suggest that you just buy a bigger SSD (like a Samsung 830/840 Pro 256GB/512GB) and use the Velo as a SATAIII connector for the single drive and use all the other ports for mass storage (ie HDD's, etc). You can definitely resell your Intel drives or re-use it in the system as RAID 0 in the Bays for other stuff.

Hope this works out. It's a possible solution.
solarsystemtw is offline   0 Reply With Quote

Reply
MacRumors Forums > Apple Hardware > Desktops > Mac Pro

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
Velocity Solo X2 Now Available letscopro Mac Pro 193 May 26, 2014 07:45 AM
Resolved: Velocity Solo x1 and BootCamp NOTNlCE Mac Pro 31 Jan 4, 2014 02:52 AM
Velocity Solo X2 - Two SSD's costabunny Mac Pro 22 Nov 22, 2013 06:46 PM
Mac Pro 3,1 boot problem Velocity Solo x2 hamishb Mac Pro 9 Nov 21, 2013 11:31 AM
Apricorn Velocity Solo X2 and Boot Camp with Win 7 x64 = Endless Rebooting Loop Dr. Stealth Mac Pro 9 Apr 30, 2013 01:43 AM

Forum Jump

All times are GMT -5. The time now is 12:39 AM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC