|Jan 2, 2013, 10:01 PM||#1|
iMac 17 inch vertical lines, logic board replacement
hi, i have an intel imac 17. The imac had the usual vertical lines on the display so i decided to change out the motherboard. I got one from ebay that says it has been tested to work. I set everything back up again and now all i get is the fans spining and the white light on solid. there is nothing on the display and no start up sound. any idea what could be going on? thank
|Jan 2, 2013, 10:03 PM||#2|
Sounds like you didn't put it in properly.
The true way is along a rope that is not spanned high in the air, but only just above the ground. It seems intended more to cause stumbling than to be walked along.
|Feb 1, 2013, 09:45 AM||#5|
usually that problem is not related with the logic board... did the vertical lines appear when connected to an external display?
there are numerous reports stating that the problem is solved by changing screens.
PPC - G4 Cube with 1.35 GHz Sonnet; Ibook G3 Indigo 366 MHz; Powerbook G3 Pismo 400MHz; Powerbook G4 12' 1.33 GHz;
Intel - iMac 5.1; MBA 13' i5 1.7 GHz; MBA 11' i5 1.6 GHz; MBP 17' C2D 2.8 GHz
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|Vertical Lines - iMac 27 inch i7||acciogabby||iMac||30||Dec 4, 2014 08:53 PM|
|Possible logic board replacement 2010 iMac 27"||Squizzles||iMac||0||Mar 26, 2014 03:24 PM|
|Logic board replacement for early 2008 24" iMac||Mike Toole||iMac||2||Mar 26, 2014 01:40 PM|
|2010 iMac had vertical lines on screen||ThatEnchanted||iMac||4||Nov 30, 2013 11:58 AM|
|Imac with vertical lines on screen and crash, HELP!||Ciatzo||iMac||2||Nov 25, 2013 12:01 PM|
All times are GMT -5. The time now is 07:35 PM.