|Dec 4, 2012, 03:50 PM||#1|
I tried to upgrade my 12-core 2.66 Mac Pro mid 2010 from 4x8GB Ram=32Gb to 48Gb but the two 8Gb RAM are not recognized by the system. I have First Choice modules from late 2010 and added 2x8 Gb First Choice from this dear. In this case the Mac didnīt even start; i the second attempt I tried out 2x8Gb Samsung and the computer started but the new RaAM was not even recognized. When I tried to start the Computer with the new RAM allone - without my old RAM - it didnīt start up at all (there was just a red light for about a second on the RAM) - and: weird enough: when I reinstalled my 4x8 GB of old RAM the system asked me to put the RAM-modules to position 1, 2 and 6 and 7 instead of 1,2 and 5 and 6. The old RAM works all all slots the new RAM not in one of them.
Who can help me?
Iīm in despair cause I need more RAM.
Thanks for you help
|Dec 4, 2012, 04:00 PM||#2|
There is another consideration: In the case of 8 GB DDR3-1333 ECC DIMMs, you often need to match the manufacturer of the chipset to assure compatibility. So if you mix a Micron chip module with a Hynix chip module, even if it is from the same seller, they can fail to work. Contact the seller and give them all the info you can of the original modules.
Ex = former, no longer. Spurt = a leak, esp. when caused by water pressure. Expert = a has-been drip under pressure.
|Dec 5, 2012, 01:01 AM||#4|
Thanks a lot for your replies. Yes both kinds of RAM are ECC.
I will send the data of my present RAM to the seller of the RAM if they match.
The strange thing is that both new kinds of RAM are not recognized by my computer. But with the old ones everything goes well.
I only recognized that every time I restart the computer now the system tells me that my RAM is the right configuration - even when I didnīt change anything.
Last edited by Paradiseapple; Dec 5, 2012 at 01:07 AM.
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|Weird freezing and display issues after ram upgrade and OS X upgrade.||MobsterMac||MacBook Pro||6||Jul 29, 2014 06:26 AM|
|8GB RAM upgrade problem on Macbook Pro mid 2010||nikicampos||MacBook Pro||11||Jan 16, 2014 11:19 AM|
|Mid 2010 iMac 11,3 i3 RAM upgrade problem||Canuckfu||iMac||2||May 23, 2013 10:32 PM|
|High page outs after ram upgrade and Mtn lion upgrade||Squiggles13||MacBook Pro||1||Dec 7, 2012 08:57 PM|
|13" MBP RAM upgrade = HD3000 VRAM upgrade?||Doggman||MacBook Pro||5||Aug 17, 2012 03:47 AM|
All times are GMT -5. The time now is 03:54 PM.